0
RESEARCH PAPERS: Arctic Engineering

In-Ice Calibration Tests for an Elongated, Uniaxial Brass Ice Stress Sensor

[+] Author and Article Information
J. B. Johnson

U.S. Army Cold Regions Research, Engineering Laboratory, Hanover, N.H. 03755

J. Energy Resour. Technol 107(4), 506-510 (Dec 01, 1985) (5 pages) doi:10.1115/1.3231226 History: Received June 27, 1984; Revised November 08, 1984; Online October 22, 2009

Abstract

An elongated, uniaxial brass ice stress sensor has been developed by the University of Alaska and used in several field experiments. Laboratory calibration tests have been conducted, in a 60 × 29.5 × 8.5 in. (1524 × 750 × 216 mm) ice block into which the sensor was frozen, to determine the sensor’s response characteristics. Test results indicate that the sensor acts as a stress concentrator with a stress concentration factor of 2.4 and transverse sensitivity of −1.3 at stresses below 30 lbf/in2 (207 kPa). At stresses greater than 30 lbf/in2 (207 kPa) the stress concentration factor increased and the sensor exhibited a time delay response to load. Differences of 22 percent were measured between the measured sensor stress immediately after a constant ice load was applied and the asymptotic stress limit. Interpretation of measured sensor stresses can be considered reliable at ambient ice stress levels below 30 lbf/in2 (207 kPa).

Copyright © 1985 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In