High-Pressure Ignition of Oil Sands Samples in Oxygen Atmospheres Containing Various Concentrations of Diluents

[+] Author and Article Information
S. A. Mehta, G. A. Karim

Department of Mechanical Engineering, The University of Calgary, Calgary, Alberta, Canada

J. Energy Resour. Technol 112(4), 264-267 (Dec 01, 1990) (4 pages) doi:10.1115/1.2905771 History: Received April 01, 1990; Revised August 26, 1990; Online April 16, 2008


In-situ recovery of oil from oil sands deposits by combustion requires the injection of vast quantities of oxygen into the bed of deposits. Accordingly, there is a need to establish the ignition characteristics of high-grade Athabasca oil sands in environments containing pure oxygen at high-pressure and including the role of the presence of various diluents with the oxygen. A high-pressure constant volume bomb with a water calorimeter was employed as the test apparatus over the pressure range of 0.1 MPa to 4.0 MPa at ambient temperature. The role of the presence of the diluents, helium, nitrogen and carbon dioxide, with the oxygen, was also considered. Controlled ignition was achieved by employing electrically fusable nickel-chromium wire looped around the sample. Moreover, the presence of an ignition promotor such as benzoic acid was also considered. The paper presents the results of an experimental program that examined the effects of changes in the pressure, amounts of diluents and ignition energy on the ignition limits and subsequent combustion processes at ambient initial temperature. Moreover, the morphological changes to the samples at various stages of the process were also examined and discussed.

Copyright © 1990 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In