The Influence of Orifice Size on the Mass Flow During Flash Boiling of HCFC-22 From a Small Vessel

[+] Author and Article Information
D. W. Nutter

Mechanical Engineering Department, University of Arkansas, Fayetteville, AR 72701

D. L. O’Neal

Mechanical Engineering Department, Texas A&M University, College Station, TX 77843-3123

J. Energy Resour. Technol 119(3), 193-199 (Sep 01, 1997) (7 pages) doi:10.1115/1.2794989 History: Received March 22, 1997; Revised May 20, 1997; Online November 06, 2007


An experimental investigation was conducted to study the flash boiling process and the influence of the exiting restriction (orifice) size on the mass flow during flash boiling of HCFC-22 in a glass pressure vessel. An apparatus was built and a combination of tests were run with three interchangeable exiting orifices (1.59, 3.18, and 5.56 mm diameters). The flashed vapor was vented from a 1110-mL vessel to a large “semi-infinite” tank initially set at 120 kPa. Calculations revealed that the refrigerant flow exiting the vessel was choked, depending on the orifice size. Smaller orifices were choked longer, had slower depressurization rates, and reduced mass flow rates. The depressurization rates were greater for tests large offices which enabled the liquid to become more highly superheated, up to 41°C for one test case, and ultimately vaporize more refrigerant.

Copyright © 1997 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In