0
Research Papers: Petroleum Wells-Drilling/Production/Construction

A Method to Double the Extension Ability of Radial Jet Drilling Technology

[+] Author and Article Information
Li Jingbin

State Key Laboratory of Petroleum Resources
and Prospecting,
China University of Petroleum Beijing,
Beijing 102249, China
e-mail: Lijingbin555@hotmail.com

Zhang Guangqing

State Key Laboratory of Petroleum Resources
and Prospecting,
China University of Petroleum Beijing,
Beijing 102249, China
e-mail: zhang200800@gmail.com

Li Gensheng

State Key Laboratory of Petroleum Resources
and Prospecting,
China University of Petroleum Beijing,
Beijing 102249, China
e-mail: ligs@cup.edu.cn

Huang Zhongwei

State Key Laboratory of Petroleum Resources
and Prospecting,
China University of Petroleum Beijing,
Beijing 102249, China
e-mail: huangzw@cup.edu.cn

Li Weichang

State Key Laboratory of Petroleum Resources
and Prospecting,
China University of Petroleum Beijing,
Beijing 102249, China
e-mail: 754434811@qq.com

1Corresponding author.

Contributed by the Petroleum Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received October 14, 2017; final manuscript received March 26, 2018; published online May 7, 2018. Assoc. Editor: Ray (Zhenhua) Rui.

J. Energy Resour. Technol 140(9), 093102 (May 07, 2018) (7 pages) Paper No: JERT-17-1562; doi: 10.1115/1.4039977 History: Received October 14, 2017; Revised March 26, 2018

Radial jet drilling (RJD) technology is an effective method to enhance oil and gas recovery by penetrating the near-wellbore damage zone, and increasing the drainage radius greatly. Recently, it is identified as a potential technology to develop the geothermal energy. But the extension ability, one of the most critical issues of the RJD, is limited. Because only high pressure flexible hose (HPFH), which is hard to be fed in and subjected to greater resistance by the diverter, can be used as the drill stem to turn from vertical to horizontal in the casing. In this paper, an innovative method to feed in the HPFH by the drag force generated by high velocity flow in narrow annulus is proposed. The drag force model is built, validated, and modified by theoretical and experimental ways. Results show that the resulting drag force, which is equivalent to the self-propelled force, can easily achieve and feed in the HPFH. There is a power law relationship between the drag force and the average velocity; the drag force increases linearly with the length of the narrow annulus. Higher average velocity and 1–1.5 m annulus length are recommended. According to force analysis, the extension ability of the RJD can be doubled theoretically by this method. The results of this paper will greatly promote the development of RJD technology.

FIGURES IN THIS ARTICLE
<>
Copyright © 2018 by ASME
Your Session has timed out. Please sign back in to continue.

References

Stopa, J. , and Nawrat, S. , 2012, “Computer Modeling of Coal Bed Methane Recovery in Coal Mines,” ASME J. Energy Resour. Technol., 134(3), p. 032804. [CrossRef]
Wang, L. , Wang, S. , and Zhang, R. , 2017, “Review of Multi-Scale and Multi-Physical Simulation Technologies for Shale and Tight Gas Reservoir,” J. Natural Gas Sci. Eng., 37, pp. 560–578. [CrossRef]
Rui, Z. , Wang, X. , Zhang, Z. , Lu, J. , Chen, G. , Zhou, X. , and Patil, S. , 2018, “A Realistic and Integrated Model for Evaluating Oil Sands Development With Steam Assisted Gravity Drainage Technology in Canada,” Appl. Energy, 213C, pp. 76–91. [CrossRef]
Mohamed, I. , He, J. , and Nasr-EI-Din, H. , 2013, “Experimental Analysis of CO2 Injection on Permeability of Vuggy Carbonate Aquifers,” ASME J. Energy Resour. Technol., 135(1), p. 013301. [CrossRef]
Osholake, T. , Wang, J. , and Ertekin, T. , 2013, “Factors Affecting Hydraulically Fractured Well Performance in the Marcellus Shale Gas Reservoirs,” ASME J. Energy Resour. Technol., 135(1), p. 013402. [CrossRef]
Ji, W. , Song, U. , Meng, M. , and Huang, H. , 2017, “Pore Characterization of Isolated Organic Matter From High Matured Gas Shale Reservoir,” Int. J. Coal Geology, 174, pp. 31–40. [CrossRef]
Rui, Z. , Lu, J. , Zhang, Z. , Guo, R. , Ling, K. , Zhang, R. , and Patil, S. , 2017, “A Quantitative Oil and Gas Reservoir Evaluation System for Development,” J. Natural Gas Sci. Eng., 42, pp. 31–39. [CrossRef]
Cui, K. , Qian, Y. , Jeon, I. , Anisimonv, A. , Matsuo, Y. , Kauppinen, I. E. , and Maruyama, S. , 2017, “Scalable and Solid-State Redox Functionalization of Transparent Single-Walled Carbon Nanotube Films for Highly Efficient and Stable Solar Cells,” Adv. Energy Mater., 7 (18), p. 1700449. [CrossRef]
Sun, J. , Gamboa, E. , and Schechter, D. , 2016, “An Integrated Workflow for Characterization and Simulation of Complex Fracture Networks Utilizing Microseismic and Horizontal Core Data,” J. Natural Gas Sci. Eng., 34, pp. 1347–1360. [CrossRef]
Guo, T. , Li, Y. , Ding, Y. , Qu, Z. , and Gai, N. , 2017, “Evaluation of Acid Fracturing Treatments in Shale Formation,” Energy Fuel, 31(10), pp. 10479–10489. [CrossRef]
Feng, Y. , Jones, J. F. , and Gray, K. E. , 2016, “A Review on Fracture-Initiation and-Propagation Pressures for Lost Circulation and Wellbore Strengthening,” SPE Drill. Completion, 31(02), pp. 134–144. [CrossRef]
Feng, Y. , and Gray, K. E. , 2016, “A Parametric Study for Wellbore Strengthening,” J. Natural Gas Sci. Eng., 30, pp. 350–363. [CrossRef]
Feng, Y. , and Gray, K. E. , 2016, “A Fracture-Mechanics-Based Model for Wellbore Strengthening Applications,” J. Natural Gas Sci. Eng., 29, pp. 392–400. [CrossRef]
Zeng, J. , Wang, X. , Guo, J. , and Zeng, F. , 2017, “Composite Linear Flow Model for Multi-Fractured Horizontal Wells in Heterogeneous Shale Reservoir,” J. Natural Gas Sci. Eng., 38, pp. 527–548. [CrossRef]
Li, Y. , Deng, J. G. , and Liu, W. , 2017, “Modeling Hydraulic Fracture Propagation Using Cohesive Zone Model Equipped With Frictional Contact Capability,” Comput. Geotechnics, 91, pp. 58–70. [CrossRef]
Zhu, H. Y. , Guo, J. C. , Zhao, X. , Lu, Q. , and Luo, B. , 2014, “Hydraulic Fracture Initiation Pressure of Anisotropic Shale Gas Reservoirs,” Geomech. Eng., 7(4), pp. 403–430. [CrossRef]
Wang, L. , Wang, X. , Ding, X. , Zhang, L. , and Li, C. , 2012, “Rate Decline Curves Analysis of a Vertical Fractured Well With Fracture Face Damage,” ASME J. Energy Resour. Technol., 134(3), p. 032803. [CrossRef]
Sedaghat, M. , Ghazanfari, M. , Parvazdavani, M. , and Morshedi, S. , 2013, “Experimental Investigation of Microscopic/Macroscopic Efficiency of Polymer Flooding in Fractured Heavy Oil Five-Spot Systems,” ASME J. Energy Resour. Technol., 135(3), p. 032901. [CrossRef]
Rui, Z. , Guo, T. , Feng, Q. , Qu, Z. , Qi, N. , and Gong, F. , 2018, “Influence of Gravel on the Propagation Pattern of Hydraulic Fracture in the Glutenite Reservoir,” J. Pet. Sci. Eng., 165, pp. 627–639. [CrossRef]
Rui, Z. , Peng, F. , Chang, H. , Ling, K. , Chen, G. , and Zhou, X. , 2017, “Investigation Into the Performance of Oil and Gas Projects,” J. Natural Gas Sci. Eng., 38, pp. 12–20. [CrossRef]
Rui, Z. , Li, C. , Peng, P. , Ling, K. , Chen, G. , Zhou, X. , and Chang, H. , 2017, “Development of Industry Performance Metrics for Offshore Oil and Gas Project,” J. Natural Gas Sci. Eng., 39, pp. 44–53. [CrossRef]
Kamel, A. H. , 2017, “RJD: A Cost Effective Frackless Solution for Production Enhancement in Marginal Fields,” SPE Eastern Regional Meeting, Canton, OH, Sept. 13–15, SPE Paper No. SPE-184053-MS.
Dickinson, W. , and Dickinson, R. W. , 1985, “Horizontal Radial Drilling System,” SPE California Regional Meeting, Bakersfield, CA, Mar. 27–29, SPE Paper No. SPE-13949-MS.
Dickinson, W. , Anderson, R. R. , and Dickinson, R. W. , 1989, “The Ultrashort-Radius Radial System,” SPE Drill. Eng., 4(3), pp. 247–254. [CrossRef]
Carl, W. L. , 1993, “Method of and Apparatus for Horizontal Well Drilling,” US Patent No. 5,853,056. https://patents.google.com/patent/US5853056
Dickinson, W. , Dykstra, H. , Nees, J. M. , and Dickinson, E. , 1992, “The Ultrashort Radius Radial System Applied to Thermal Recovery of Heavy Oil,” SPE Western Regional Meeting, Bakersfield, CA, Mar. 30–Apr. 1, SPE Paper No. SPE-24087-MS.
Li, Y. , Wang, C. , Shi, L. , and Guo, W. , 2000, “Application and Development of Drilling and Completion of the Ultrashort-Radius Radial Well by High Pressure Jet Flow Techniques,” International Oil and Gas Conference and Exhibition in China, Beijing, China, Nov. 7–10, SPE Paper No. SPE-64756-MS.
Buset, P. , Riiber, M. , and Eek, A. , 2001, “Jet Drilling Tool: Cost-Effective Lateral Drilling Technology for Enhanced Oil Recovery,” SPE/ICoTA Coiled Tubing Roundtable, Houston, TX, Mar. 7–8, SPE Paper No. SPE-68504-MS.
Cirigliano, R. A. , and Blacutt, J. F. T. , 2007, “First Experience in the Application of Radial Perforation Technology in Deep Wells,” Latin American & Caribbean Petroleum Engineering Conference, Buenos Aires, Argentina, Apr. 15–18, SPE Paper No. SPE-107182-MS.
Abdel-Ghany, M. A. , Siso, S. , Hassan, A. M. , Pierpaolo, P. , and Roberto, C. , 2011, “New Technology Application, Radial Drilling Petrobel, First Well in Egypt,” Offshore Mediterranean Conference, Ravenna, Italy, Mar. 23–25, Paper No. OMC-2011-163. https://www.onepetro.org/conference-paper/OMC-2011-163
Cinelli, S. D. , and Kamel, A. H. , 2013, “Novel Technique to Drill Horizontal Laterals Revitalizes Aging Field,” SPE/IADC Drilling Conference, Amsterdam, The Netherlands, Mar. 5–7, SPE Paper No. SPE-163405-MS.
Zhang, Y. , Hao, Y. , and Samuel, R. , 2013, “Analytical Model to Estimate the Drag Forces for Microhole Coiled Tubing Drilling,” ASME J. Energy Resour. Technol., 135(3), p. 033101. [CrossRef]
Li, J. , Li, G. , Huang, Z. , Song, X. , Yang, R. , and Peng, K. , 2015, “The Self-Propelled Force Model of a Multi-Orifice Nozzle for Radial Jet Drilling,” J. Natural Gas Sci. Eng., 24, pp. 441–448. [CrossRef]
Fronk, B. M. , Neal, R. , and Garimella, S. , 2010, “Evolution of the Transition to a World Driven by Renewable Energy,” ASME J. Energy Resour. Technol., 132(2), p. 021009. [CrossRef]
Wong, K. V. , and Tan, N. , 2015, “Feasibility of Using More Geothermal Energy to Generate Electricity,” ASME J. Energy Resour. Technol., 137(4), p. 041201. [CrossRef]
Li, M. , and Lior, N. , 2015, “Analysis of Hydraulic Fracturing and Reservoir Performance in Enhanced Geothermal Systems,” ASME J. Energy Resour. Technol., 137(4), p. 041203.
Cui, G. , Ren, S. , Rui, Z. , Ezekiel, J. , Zhang, L. , and Wang, H. , 2017, “The Influence of Complicated Fluid-Rock Interactions on the Geothermal Exploitation in the CO2 Plume Geothermal System,” Appl. Energy, in press.
Nair, R. , Peters, E. , Šliaupa, S. , Valickas, R. , and Petrauskas, S. , 2017, “A Case Study of Radial Jetting Technology for Enhancing Geothermal Energy Systems at Klaipėda Geothermal Demonstration Plant,” 42nd Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, CA, Feb. 13–15, Paper No. SGP-TR-212. https://pangea.stanford.edu/ERE/db/GeoConf/papers/SGW/2017/Nair.pdf
Wang, B. , Li, G. , Huang, Z. , Li, J. , Zheng, D. , and Li, H. , 2016, “Hydraulics Calculations and Field Application of Radial Jet Drilling,” SPE Drill. Completion, 31(1), pp. 71–81. [CrossRef]
Wang, B. , Li, G. , Huang, Z. , Ma, T. , Zheng, D. , and Li, K. , 2017, “Lab Testing and Finite Element Method Simulation of Hole Deflector Performance for Radial Jet Drilling,” ASME J. Energy Resour. Technol., 139(3), p. 032906. [CrossRef]
Li, G. , Li, J. , Huang, Z. , Niu, J. , Song, X. , Xu, Z. , and Liu, X. , 2015, “The Method to Feed in High Pressure Flexible Hose With the Drag Force Generated by High Velocity Flow in the Narrow Gap,” China Patent No. 201510664563.5.
Reed, T. D. , and Pilehvari, A. A. , 1993, “A New Model for Laminar, Transitional, and Turbulent Flow of Drilling Muds,” SPE Production Operations Symposium, Mar. 21–23, Oklahoma City, OK, SPE Paper No. SPE-25456-MS.
Jones , O. C., Jr. , and Leung, J. C. M. , 1981, “An Improvement in the Calculation of Turbulent Friction in Smooth Concentric Annuli,” ASME J. Fluids Eng., 103(4), pp. 615–623. [CrossRef]
Bourgoyne , A. T., Jr., Chenevert , M. R. , Millheim, K. K. , and Young , F. S., Jr. , 1986, Applied Drilling Engineering, Society of Petroleum Engineers, Richardson, TX, p. 140.
Hanks, R. W. , 1980, “Critical Reynolds Numbers, for Newtonian Flow in Concentric Annuli,” AlChE J., 26(1), pp. 152–154. [CrossRef]
Hanks, R. W. , and Peterson, J. M. , 1982, “Complex Transitional Flows in Concentric Annuli,” AlChE J., 28(5), pp. 800–806. [CrossRef]
Churchill, S. W. , and Chan, C. , 1995, “Turbulent Flow in Channels in Terms of Turbulent Shear and Normal Stresses,” AIChE J., 41(12), pp. 2513–2521. [CrossRef]
Rehme, K. , 1974, “Turbulent Flow in Smooth Concentric Annuli With Small Radius Ratios,” J. Fluid Mech, 64(2), pp. 263–288. [CrossRef]
Jonsson, V. K. , and Sparrow, E. M. , 1966, “Experiments on Turbulent-Flow Phenomena in Eccentric Annular Ducts,” J. Fluid Mech, 25(1), pp. 65–86. [CrossRef]
Saasen, A. , 2014, “Annular Frictional Pressure Losses During Drilling-Predicting the Effect of Drillstring Rotation,” ASME J. Energy Resour. Technol., 136(3), p. 034501. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

Schematic diagram of the method to feed in the HPFH by narrow annulus

Grahic Jump Location
Fig. 2

Principle diagram of drag force measurement experiment

Grahic Jump Location
Fig. 3

Photo of drag force measurement experiment

Grahic Jump Location
Fig. 4

Curves of simulated and predicted drag force

Grahic Jump Location
Fig. 5

The drag force-velocity curves with different narrow annulus length

Grahic Jump Location
Fig. 6

The drag force-narrow annulus length curves with different average velocity

Tables

Errata

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In