Research Papers: Petroleum Engineering

Risk-Based Approach to Evaluate Casing Integrity in Upstream Wells

[+] Author and Article Information
Mohammed D. Al-Ajmi

Saudi Aramco,
Abqaiq 31311, Saudi Arabia
e-mail: Mohammed.ajmi.11@aramco.com

Dhafer Al-Shehri

Department of Petroleum Engineering,
King Fahad University of Petroleum
and Minerals,
Dhahram 31261, Saudi Arabia
e-mail: alshehrida@kfupm.edu.sa

Mohamed Mahmoud

Department of Petroleum Engineering,
King Fahad University of Petroleum
and Minerals,
Dhahram 31261, Saudi Arabia
e-mail: mmahmoud@kfupm.edu.sa

Nasser M. Al-Hajri

Saudi Aramco,
Abqaiq 31311, Saudi Arabia
e-mail: nasser.hajri.22@ aramco.com

1Corresponding author.

Contributed by the Petroleum Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received December 15, 2017; final manuscript received May 6, 2018; published online July 2, 2018. Assoc. Editor: Ray (Zhenhua) Rui.

J. Energy Resour. Technol 140(12), 122901 (Jul 02, 2018) (13 pages) Paper No: JERT-17-1713; doi: 10.1115/1.4040237 History: Received December 15, 2017; Revised May 06, 2018

Downhole casing leaks in oil and gas wells will highly impact the shallow water horizons and this will affect the environment and fresh water resources. Proactive measures and forecasting of this leak will help eliminate the consequences of downhole casing leaks and, in turn, will protect the environment. Additionally, downhole casing leaks may also cause seepage of toxic gases to the fresh water zones and to the surface through the casing annuli. In this paper, we introduced a risk-based methodology to predict the downhole casing leaks in oil and gas wells using advanced casing corrosion logs such as electromagnetic logs. Downhole casing corrosion was observed to assess the remaining well life. Electromagnetic (EM) corrosion logs are the current practice for monitoring the casing corrosion. The corrosion assessment from EM logs is insufficient because these logs cannot read in multiple casings in the well. EM tool gives average reading for the corrosion in the casing at a specific depth and it does not indicate the orientation of the corrosion. EM log does not assess the 360 deg corrosion profile in the casing and it only provides average value and this may lead to wrong decision. All of this makes EM logs uncertain tools to assess the corrosion in the downhole casing. A unified criterion to assess the corrosion in the casing and to decide workover operations or not has been identified to minimize the field challenges related to this issue. A new approach was introduced in this paper to enhance the EM logs to detect the downhole casing corrosion. Corrosion data were collected from different fields (around 500 data points) to build a probabilistic approach to assess the casing failure based on the average metal loss from the EM corrosion log. The failure model was used to set the ranges for the casing failure and the probability of casing failure for different casings. The prediction of probability of failure (PF) will act as proactive maintenance which will help prevent further or future casing leaks.

Copyright © 2018 by ASME
Your Session has timed out. Please sign back in to continue.


Al-Ajmi, M. D. , Abdulraheem, A. , Mishkhes, A. T. , and Al-Shammari, M. J. , 2015, “ Profiling Downhole Casing Integrity Using Artificial Intelligence,” SPE Digital Energy Conference and Exhibition, The Woodlands, TX, Mar. 3–5, SPE Paper No. SPE-173422-MS.
Kabir, C. S. , Del Signore, A. G. , Hasan, A. R. , and Al-Dashti, Q. , 1997, “ Establishing Geothermal Gradient Using a New Static Temperature Analysis Method,” SPE Annual Technical Conference and Exhibition, San Antonio, TX, Oct. 5–8, SPE Paper No. SPE-38667.
Wang, Z. , and Chen, Y. , 2018, “ Finite Element Analysis of Thermally Induced Stresses in the Near-Wellbore Region During Invasion of Mud Into Fractures,” ASME J. Energy Resour. Technol., 140(5), p. 052909. [CrossRef]
Rui, Z. , Wang, X. , Zhang, Z. , Lu, J. , Chen, G. , Zhou, X. , and Patil, S. , 2018, “ A Realistic and Integrated Model for Evaluating Oil Sands Development With Steam Assisted Gravity Drainage Technology in Canada,” Appl. Energy, 213, pp. 76–91. [CrossRef]
Feng, Y. , Li, X. , and Gray, K. E. , 2017, “ Development of a 3D Numerical Model for Quantifying Fluid-Driven Interface Debonding of an Injector Well,” Int. J. Greenhouse Gas Control, 62, pp. 76–90. [CrossRef]
Feng, Y. , Li, X. , and Gray, K. E. , 2016, “ Well Integrity Analysis: 3D Numerical Modeling of Cement Interface Debonding,” 50th US Rock Mechanics/Geomechanics Symposium, Houston, TX, June 26–29, Paper No. ARMA-2016-246. https://www.onepetro.org/conference-paper/ARMA-2016-246
Rui, Z. , Guo, T. , Feng, Q. , Qu, Z. , Qi, N. , and Gong, F. , 2018, “ Influence of Gravel on the Propagation Pattern of Hydraulic Fracture in the Glutenite Reservoir,” J. Pet. Sci. Eng., 165, pp. 627–63. [CrossRef]
Guo, J. , Luo, B. , Lu, C. , Lai, J. , and Ren, J. , 2017, “ Numerical Investigation of Hydraulic Fracture Propagation in a Layered Reservoir Using the Cohesive Zone Method,” Eng. Fract. Mech., 186, pp. 195–207. [CrossRef]
Zeng, J. , Wang, X. , Guo, J. , and Zeng, F. , 2017, “ Composite Linear Flow Model for Multi-Fractured Horizontal Wells in Heterogeneous Shale Reservoir,” J. Nat. Gas Sci. Eng., 38, pp. 527–548. [CrossRef]
Guo, T. , Gong, F. , Qu, Z. , Tian, X. , and Liu, B. , 2018, “ Study on Fracture Initiation Mechanisms of Hydraulic Refracturing Guided by Directional Boreholes,” ASME J. Energy Resour. Technol., 140(8), p. 082901. [CrossRef]
Chen, X. , Gao, D. , Yang, J. , Luo, M. , Feng, Y. , and Li, X. , 2018, “ A Comprehensive Wellbore Stability Model Considering Poroelastic and Thermal Effects for Inclined Wellbores in Deepwater Drilling,” ASME J. Energy Resour. Technol., 140(9), p. 092903.
Qin, X. , Gao, D. , and Liu, Y. , 2018, “ Dynamic Analysis on Unbuckling Process of Helically Buckled Coiled Tubing While Milling Plugs,” ASME J. Energy Resour. Technol., 140(9), p. 092902.
Stroud, S. G. , and Fuller, C. A. , 1962, “ New Electromagnetic Inspection Device Permits Improved Casing Corrosion Evaluation,” J. Pet. Technol., 14(3), pp. 257–260.
Edwards, J. M. , and Stroud, S. G. , 1964, “ Field Results of the Electromagnetic Casing Inspection Log,” J. Pet. Technol., 16(4), pp. 377–382.
Cuthbert, J. F. , and Johnson, W. M. , 1974, “ New Casing Inspection Log ,” Fall Meeting of the Society of Petroleum Engineers of AIME, Houston, TX, Oct. 6–9, SPE Paper No. SPE-5090-MS.
Smith, G. S. , 1981, “ Principles and Applications of a New In-Situ Method for Inspection of Well Casing,” Middle East Technical Conference and Exhibition, Manama, Bahrain, Mar. 9–12, SPE Paper No. SPE-9634-MS.
Sharshar, A. E. , Nutt, R. L. , Smith, P. M. , and Crossouard, P.A. , 1991, “ Dukhan Field Multiwell Corrosion Study,” Middle East Oil Show, Manama, Bahrain, Nov. 16–19, SPE Paper No. SPE-21366-MS.
Brill, T. M. , Demichel, C. , Nichols, E. A. , and Zapata Bermudez, F. , 2011, “ Electromagnetic Casing Inspection Tool for Corrosion Evaluation,” International Petroleum Technology Conference, Bangkok, Thailand, Nov. 15–17, Paper No. IPTC-14865-MS.
Burton, J. P. , and Yang, H. , 2011, “ Outer Concentric String Casing Damage Evaluation: Advancements in Electromagnetic Inspection Data Interpretation for Common North Slope Well Completions,” SPE Western North American Region Meeting, Anchorage, AK, May 7–11, SPE Paper No. SPE-144575-MS.
Rourke, M. , Li, Y. , and Roberts, G. , 2013, “ Multi-Tubular Corrosion Inspection Using a Pulsed Eddy Current Logging Tool,” International Petroleum Technology Conference, Beijing, China, Mar. 26–28, Paper No. IPTC-16645-MS.
Al-Yateem, K. , Kohring, J. , Qahtani, H. , and Garcia, J. , 2013, “ Measuring and Profiling Casing Corrosion for Predicting Subsurface Leaks,” International Petroleum Technology Conference, Beijing, China, Mar. 26–28, Paper No. IPTC-17170-MS.
Al-Ameri, W. A. , Abdulraheem, A. , and Mahmoud, M. A. , 2016, “ Long-Term Effects of CO2 Sequestration on Rock Mechanical Properties,” ASME J. Energy Resour. Technol., 138(1), p. 012201. [CrossRef]
Adebayo, A. , Mahmoud, M. A. , and Al-Youssef, H. Y. , 2015, “ An Experimental Investigation of the Use of Combined Resistivity and Temperature Logs for Scale Monitoring in Carbonate Formations During CO2 Sequestration,” ASME J. Energy Resour. Technol., 137(3), p. 032202. [CrossRef]
Barri, A. , Mahmoud, M. A. , and Elkatatny, S. M. , 2016, “ Evaluation of Rock Mechanical Properties Alteration During Matrix Stimulation With Chelating Agents,” ASME J. Energy Resour. Technol., 138(3), p. 032907. [CrossRef]
Taleghani, A. D. , Li, G. , and Moayeri, M. , 2017, “ Smart Expandable Cement Additive to Achieve Better Wellbore Integrity,” ASME J. Energy Resour. Technol., 139(6), p. 062903. [CrossRef]
Taleghani, A. D. , and Wang, W. , 2017, “ Emergence of Delamination Fractures Around the Casing and Its Stability,” ASME J. Energy Resour. Technol., 139(1), p. 012904. [CrossRef]
Taleghani, N. D. , and Tayagi, M. , 2017, “ Impacts of Major Offshore Oil Spill Incidents on Petroleum Industry and Regional Economy,” ASME J. Energy Resour. Technol., 139(2), p. 022913. [CrossRef]
Dev, B. , Samudrala, O. , and Wang, J. , 2017, “ Comparison of Leakage Characteristics of Viton and Polytetrafluoroethylene Seals in Gas-Lift Valve Applications,” ASME J. Energy Resour. Technol., 139(1), p. 012906. [CrossRef]
Rui, Z. , Han, G. , Zhang, H. , Wang, S. , Pu, H. , and Ling, K. , 2017, “ A New Model to Evaluate Two Leak Points in a Gas Pipeline,” J. Nat. Gas Sci. Eng., 46, pp. 491–497. [CrossRef]
Yan, W. , Xu, y. , Zhou, Y. , and Wang, K. , 2017, “ Investigation of Stress Concentration and Casing Strength Degradation Caused by Corrosion Pits,” Int. J. Corros., 2016, p. 6930234.
Zhu, P. , Yan, W. , Deng, L. , and Deng , J. , 2015, “ The Application of Mechanical-Chemical Corrosion Theory in Downhole Tubing CO2 Corrosion Research,” Adv. Mater. Sci. Eng., 2015, p. 296278.
Li, C. , and Samuel, R. , 2017, “ Casing Burst Strength Degradation Due to Casing Wear,” ASME J. Energy Resour. Technol., 140(3), p. 032901. [CrossRef]


Grahic Jump Location
Fig. 1

Example of temperature profile anomalies when a cross upward flow (a) or downward flow (b) takes place

Grahic Jump Location
Fig. 2

Illustration of different annuli in a well

Grahic Jump Location
Fig. 3

Electromagnetic induction tool

Grahic Jump Location
Fig. 4

A diagram showing different possibilities when the EMIT tool reads 50% metal loss on average. Case B is the worst case scenario showing 100% metal loss on one side and 0% on the other.

Grahic Jump Location
Fig. 5

Example of EMIT report. This an EMIT example of single pipe (casing only) and double pipe (casing plus tubing completion where problematic wall thinning is not significant. TMT represents nominal tubing thickness. TNT corresponds to total nominal thickness of all available pipes. TRMT symbolizes total remaining metal thickness. AMT is actual measured thickness and DT represents reduction between total nominal thickness and measured thickness.

Grahic Jump Location
Fig. 6

An illustration of the external casing corrosion concept

Grahic Jump Location
Fig. 12

Leaking and nonleaking ARBR normal distribution plots

Grahic Jump Location
Fig. 14

Probability of failure function

Grahic Jump Location
Fig. 11

Nonleaking ARBR normality test

Grahic Jump Location
Fig. 10

Leaking ARBR normality test

Grahic Jump Location
Fig. 9

Metal loss leaking and nonleaking PDF plots

Grahic Jump Location
Fig. 8

Nonleaking average metal loss data normality test

Grahic Jump Location
Fig. 7

Leaking average metal loss data normality test for 37 sample data points (N). A straight line trend of the plotted data is the condition upon which the data set is classified as normally distributed. KS stands for Kolmogorov–Smirnov test. The high p-value (more than 0.05) shows that the hypothesis of normal distribution is accepted.

Grahic Jump Location
Fig. 13

Illustration of casing failure probability derivation parameters. ARBRc is an arbitrary chosen cutoff to explain the parameters. Fhotspots is the number of leaking/failed hotspots at and above ARBRc. SFhotspots is the number of leaking/failed hotspots below ARBRc. The “SF” notion means that these hotspots survived from failure at and above ARBRc and then failed below it. SShotspots is the number of nonleaking hotspots below ARBRc. The “SS” notion means that these hotspots survived from failure at and above ARBRc and are still surviving below it.



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In