0
Review Article

A Comprehensive Review of Thermal Enhanced Oil Recovery: Techniques Evaluation

[+] Author and Article Information
Esmail M. A. Mokheimer

Mem. ASME
Mechanical Engineering Department,
College of Engineering,
King Fahd University of Petroleum and Minerals (KFUPM),
P. O. Box: 279,
Dhahran 31261, Saudi Arabia;
Center of Research Excellence
in Energy Efficiency (CEEE),
King Fahd University of Petroleum and Minerals (KFUPM),
P. O. Box: 279,
Dhahran 31261, Saudi Arabia;
Center of Research Excellence in
Renewable Energy (CoRe-RE),
King Fahd University of Petroleum and Minerals (KFUPM),
P. O. Box: 279,
Dhahran 31261, Saudi Arabia
e-mail: esmailm@kfupm.edu.sa

M. Hamdy

Mechanical Engineering Department,
College of Engineering,
King Fahd University of Petroleum and Minerals (KFUPM),
P. O. Box: 279,
Dhahran 31261, Saudi Arabia
e-mail: mhamdy@kfupm.edu.sa

Zubairu Abubakar

Mechanical Engineering Department,
College of Engineering,
King Fahd University of Petroleum and Minerals (KFUPM),
P. O. Box: 677,
Dhahran 31261, Saudi Arabia
e-mail: Zubairu@kfupm.edu.sa

Mohammad Raghib Shakeel

Mechanical Engineering Department,
College of Engineering,
King Fahd University of Petroleum and Minerals (KFUPM),
P. O. Box: 567,
Dhahran 31261, Saudi Arabia
e-mail: raghib@kfupm.edu.sa

Mohamed A. Habib

Mechanical Engineering Department,
College of Engineering,
King Fahd University of Petroleum and Minerals (KFUPM),
P. O. Box: 1866,
Dhahran 31261, Saudi Arabia
e-mail: mahabib@kfupm.edu.sa

Mohamed Mahmoud

Petroleum Engineering Department,
College of Petroleum
Engineering & Geosciences,
King Fahad University of Petroleum and Minerals (KFUPM),
P. O. Box: 5049,
Dhahran 31261, Saudi Arabia;
Center for Integrative Petroleum Research,
College of Petroleum
Engineering & Geosciences,
King Fahad University of Petroleum and Minerals (KFUPM),
P. O. Box: 5049,
Dhahran 31261, Saudi Arabia
e-mail: mamahmoud@kfupm.edu.sa

1Corresponding author.

Contributed by the Petroleum Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received July 12, 2018; final manuscript received July 21, 2018; published online September 14, 2018. Assoc. Editor: Reza Sheikhi.

J. Energy Resour. Technol 141(3), 030801 (Sep 14, 2018) (18 pages) Paper No: JERT-18-1520; doi: 10.1115/1.4041096 History: Received July 12, 2018; Revised July 21, 2018

The oil production from any well passes through three stages. The first stage is the natural extraction of oil under the well pressure, the second stage starts when the well pressure decreases. This second stage includes flooding the well with water via pumping sea or brackish water to increase the well pressure and push the oil up enhancing the oil recovery. After the first and secondary stages of oil production from the well, 20–30% of the well reserve is extracted. The well is said to be depleted while more than 70% of the oil are left over. At this stage, the third stage starts and it is called the enhanced oil recovery (EOR) or tertiary recovery. Enhanced oil recovery is a technology deployed to recover most of our finite crude oil deposit. With constant increase in energy demands, EOR will go a long way in extracting crude oil reserve while achieving huge economic benefits. EOR involves thermal and/or nonthermal means of changing the properties of crude oil in reservoirs, such as density and viscosity that ensures improved oil displacement in the reservoir and consequently better recovery. Thermal EOR, which is the focus of this paper, is considered the dominant technique among all different methods of EOR. In this paper, we present a brief overview of EOR classification in terms of thermal and nonthermal methods. Furthermore, a comprehensive review of different thermal EOR methods is presented and discussed.

FIGURES IN THIS ARTICLE
<>
Copyright © 2019 by ASME
Your Session has timed out. Please sign back in to continue.

References

Sarapardeh, A. , Kiasari, H. H. , Alizadeh, N. , Mighani, S. , and Kamari, A. , 2013, “Application of Fast-SAGD in Naturally Fractured Heavy Oil Reservoirs: A Case Study,” SPE Middle East Oil and Gas Show and Conference, Manama, Bahrain, Mar. 10–13, SPE Paper No. 164418.
Hemmati-Sarapardeh, A. , Shokrollahi, A. , Tatar, A. , Gharagheizi, F. , Mohammadi, A. H. , and Naseri, A. , 2014, “Reservoir Oil Viscosity Determination Using a Rigorous Approach,” Fuel, 116, pp. 39–48. [CrossRef]
Hemmati-Sarapardeh, A. , Khishvand, M. , Naseri, A. , and Mohammadi, A. H. , 2013, “Toward Reservoir Oil Viscosity Correlation,” Chem. Eng. Sci., 90, pp. 53–68. [CrossRef]
Sarapardeh, A. , Aminshahidy, B. , Pajouhandeh, A. , Yousefi, S. , and Kaldozakh, S. , 2016, “A Soft Computing Approach for the Determination of Crude Oil Viscosity: Light and Intermediate Crude Oil Systems,” J. Taiwan Inst. Chem. Eng., 59, pp. 1–10. [CrossRef]
Store, M. R. , 2015, “Global Enhanced Oil Recovery Market is Expected to Reach Around USD 225 Billion in 2020,” Market Research Store, FL, epub, accessed Aug. 17, 2018, http://www.marketresearchstore.com/news/global-enhanced-oil-recovery-market-is-expected-to-96
Wells, P. R. , 2008, “The Peak in World Oil Supply,” accessed Aug. 17, 2018, http://www.fuelsandenergy.com/presentations/WellsPeakOil.pdf
Naqvi, S. , 2012, “Enhanced Oil Recovery of Heavy Oil by Using Thermal and Non-Thermal Methods,” MS thesis, Dalhousie University, Halifax, NS, Canada.
Bera, A. , and Babadagli, T. , 2015, “Status of Electromagnetic Heating for Enhanced Heavy Oil/Bitumen Recovery and Future Prospects: A Review,” Appl. Energy, 151, pp. 206–226. [CrossRef]
Alvarado, V. , and Manrique, E. , 2010, “Enhanced Oil Recovery: An Update Review,” Energies, 3(9), pp. 1529–1575. [CrossRef]
Santos, R. , Loh, W. , Bannwart, A. , and Trevisan, O. , 2014, “An Overview of Heavy Oil Properties and Its Recovery and Transportation Methods,” Braz. J. Chem. Eng., 31(3), pp. 571–590. [CrossRef]
Prats, M. , 1982, Thermal Recovery (SPE Monograph Series, Vol. 7), SPE of AIME, New York.
Kokal, S. , and Al-Kaabi, A. , 2010, “Enhanced Oil Recovery: Challenges & Opportunities,” World Petroleum Council, EXPEC Advanced Research Centre, Saudi Aramco, accessed Aug. 24, 2018, https://www.world-petroleum.org/docs/docs/publications/2010yearbook/P64-69_Kokal-Al_Kaabi.pdf
Yuan, J.-Y. , Isaacs, E. E. , Huang, H. , and Vandenhoff, D. G. , 2003, “Wet Electric Heating Process,” Patent No. 6631761.
Harvey, A. H. , Arnold, M. , and El-Feky, S. A. , 1979, “Selective Electric Reservoir Heating,” J. Can. Pet. Technol., 18(3), pp. 47–57.
Computer Modelling Group, 2012, “Advanced Process and Thermal Reservoir Simulator,” Computer Modelling Group Ltd., Calgary, AB, Canada.
Faradonbeh, M. R. , Hassanzadeh, H. , and Harding, T. , 2016, “Numerical Simulations of Bitumen Recovery Using Solvent and Water Assisted Electrical Heating,” Fuel, 186, pp. 68–81. [CrossRef]
Amba, S. , Chilingar, G. , and Beeson, C. , 1964, “Use of Direct Electrical Current for Increasing the Flow Rate of Reservoir Fluids During Petroleum Recovery,” J. Can. Pet. Technol., 3(1), pp. 8–14. [CrossRef]
Chilingar, G. V. , Chang, K. S. , Davis, J. E. , Farhangi, H. , Adamson, L. , and Sawabini, S. , 1968, “Possible Use of Direct Electrical Current for Augmenting Reservoir Energy During Petroleum Production,” Compass, 45(4).
Chilingar, G. V. , Loo, W. W. , Khilyuk, L. F. , and Katz, S. A. , 1997, “Electrobioremediation of Soils Contaminated With Hydrocarbons and Metals: Progress Report,” Energy Sources, 19(2), pp. 129–146. [CrossRef]
Sahni, A. , Kumar, M. , and Knapp, R. B. , 2000, “Electromagnetic Heating Methods for Heavy Oil Reservoirs,” SPE/AAPG Western Regional Meeting, Long Beach, CA, June 19–22, SPE Paper No. 62550.
Hascakir, B. , Acar, C. , and Akin, S. , 2009, “Microwave-Assisted Heavy Oil Production: An Experimental Approach,” Energy Fuels, 23(12), pp. 6033–6039. [CrossRef]
Kovaleva, L. , Davletbaev, A. , Babadagli, T. , and Stepanova, Z. , 2010, “Effects of Electrical and Radio-Frequency Electromagnetic Heating on the Mass-Transfer Process During Miscible Injection for Heavy-Oil Recovery,” Energy Fuels, 25(2), pp. 482–486. [CrossRef]
Alomair, O. A. , Alarouj, M. A. , Althenayyan, A. A. , Al Saleh, A. H. , Almohammad, H. , Altahoo, Y. , Alhaidar, Y. , Al Ansari, S. E. , and Alshammari, Y. , 2012, “Improving Heavy Oil Recovery by Unconventional Thermal Methods,” SPE Kuwait International Petroleum Conference and Exhibition, Kuwait City, Kuwait, Dec. 10–12, SPE Paper No. 163311.
Greff, J. , and Babadagli, T. , 2013, “Use of Nano-Metal Particles as Catalyst Under Electromagnetic Heating for In-Situ Heavy Oil Recovery,” J. Pet. Sci. Eng., 112, pp. 258–265. [CrossRef]
Kovaleva, L. , Davletbaev, A. , and Minnigalimov, R. , 2010, “Recoveries of Heavy Oil and Bitumen Techniques With the Radio Frequency Electromagnetic Irradiation (Russian),” SPE Russian Oil and Gas Conference and Exhibition, Moscow, Russia, Oct. 26–28, SPE Paper No. 138086.
Davletbaev, A. Y. , Kovaleva, L. , and Nasyrov, N. , 2008, “Numerical Simulation of Injection of a Solvent Into a Production Well Under Electromagnetic Action,” Fluid Dyn., 43(4), pp. 583–589. [CrossRef]
Hu, L. , Li, H. A. , Babadagli, T. , and Ahmadloo, M. , 2017, “Experimental Investigation of Combined Electromagnetic Heating and Solvent-Assisted Gravity Drainage for Heavy Oil Recovery,” J. Pet. Sci. Eng., 154, pp. 589–601.
Chhetri, A. , and Islam, M. , 2008, “A Critical Review of Electromagnetic Heating for Enhanced Oil Recovery,” Pet. Sci. Technol., 26(14), pp. 1619–1631. [CrossRef]
Mutyala, S. , Fairbridge, C. , Paré, J. J. , Bélanger, J. M. , Ng, S. , and Hawkins, R. , 2010, “Microwave Applications to Oil Sands and Petroleum: A Review,” Fuel Process. Technol., 91(2), pp. 127–135. [CrossRef]
Rehman, M. M. , and Meribout, M. , 2012, “Conventional Versus Electrical Enhanced Oil Recovery: A Review,” J. Pet. Explor. Prod. Technol., 2(4), pp. 169–179. [CrossRef]
Mukhametshina, A. , and Martynova, E. , 2013, “Electromagnetic Heating of Heavy Oil and Bitumen: A Review of Experimental Studies and Field Applications,” J. Pet. Eng., 2013, p. 476519.
Hasanvand, M. , and Golparvar, A. , 2014, “A Critical Review of Improved Oil Recovery by Electromagnetic Heating,” Pet. Sci. Technol., 32(6), pp. 631–637. [CrossRef]
Sadeghi, A. , Hassanzadeh, H. , and Harding, T. G. , 2017, “A Comparative Study of Oil Sands Preheating Using Electromagnetic Waves, Electrical Heaters and Steam Circulation,” Int. J. Heat Mass Transfer, 111, pp. 908–916. [CrossRef]
Yang, C.-Z. , and Han, D.-K. , 1991, “Present Status of EOR in the Chinese Petroleum Industry and Its Future,” J. Pet. Sci. Eng., 6(2), pp. 175–189. [CrossRef]
Friedmann, F. , Smith, M. , and Guice, W. , 1994, “Steam-Foam Mechanistic Field Trial in the Midway-Sunset Field,” SPE Res. Eng., 9(4), pp. 297–304.
Jabbour, C. , Quintard, M. , Bertin, H. , and Robin, M. , 1996, “Oil Recovery by Steam Injection: Three-Phase Flow Effects,” J. Pet. Sci. Eng., 16(1–3), pp. 109–130. [CrossRef]
Patzek, T. W. , 1996, “Field Applications of Steam Foam for Mobility Improvement and Profile Control,” SPE Reservoir Eng., 11(2), pp. 79–86. [CrossRef]
Fatemi, S. M. , and Jamaloei, B. Y. , 2011, “Preliminary Considerations on the Application of Toe-to-Heel Steam Flooding (THSF): Injection Well–Producer Well Configurations,” Chem. Eng. Res. Des., 89(11), pp. 2365–2379. [CrossRef]
Li, S. , Li, B. , Zhang, Q. , Li, Z. , and Yang, D. , 2018, “Effect of CO2 on Heavy Oil Recovery and Physical Properties in Huff-n-Puff Processes Under Reservoir Conditions,” ASME J. Energy Resour. Technol., 140(7), p. 072907. [CrossRef]
Alikhlalov, K. , and Dindoruk, B. , 2011, “Conversion of Cyclic Steam Injection to Continuous Steam Injection,” SPE Annual Technical Conference and Exhibition, SPE Paper No. 146612.
Alvarez, J. , and Han, S. , 2013, “Current Overview of Cyclic Steam Injection Process,” J. Pet. Sci. Res., 2(3), pp. 116–127.
Jalilian, M. , Pourafshary, P. , Sola, B. S. , and Kamari, M. , 2017, “Optimization of Smart Water Chemical Composition for Carbonate Rocks Through Comparison of Active Cations Performance,” ASME J. Energy Resour. Technol., 139(6), p. 062904. [CrossRef]
Banerjee, D. K. , 2012, Oil Sands, Heavy Oil, & Bitumen, PennWell Corp, Tulsa, OK.
Ghoodjani, E. , Kharrat, R. , Vossoughi, M. , and Bolouri, S. H. , 2012, “A Review on Thermal Enhanced Heavy Oil Recovery From Fractured Carbonate Reservoirs,” SPE Heavy Oil Conference Canada, Calgary, AB, Canada, June 12–14, SPE Paper No. SPE-150147-MS.
Batycky, J. , Leaute, R. , and Dawe, B. , 1997, “A Mechanistic Model of Cyclic Steam Stimulation,” International Thermal Operations and Heavy Oil Symposium, Bakersfield, CA, Feb. 10–12, SPE Paper No. 37550.
Léauté, R. P. , Corry, K. E. , and Pustanyk, B. K. , 2004, “Liquid Addition to Steam for Enhancing Recovery of Cyclic Steam Stimulation or LASER-CSS,” Patent No. 6708759.
Babadagli, T. , Er, V. , Naderi, K. , Burkus, Z. , and Ozum, B. , 2010, “Use of Biodiesel as an Additive in Thermal Recovery of Heavy Oil and Bitumen,” J. Can. Pet. Technol., 49(11), pp. 43–48. [CrossRef]
Wu, H. , Du, Q. , Hou, J. , Li, J. , Gong, R. , Liu, Y. , and Li, Z. , 2017, “Characterization and Prediction of Gas Breakthrough With Cyclic Steam and Gas Stimulation Technique in an Offshore Heavy Oil Reservoir,” ASME J. Energy Resour. Technol., 139(3), p. 032801. [CrossRef]
Kovscek, A. , 2012, “Emerging Challenges and Potential Futures for Thermally Enhanced Oil Recovery,” J. Pet. Sci. Eng., 98–99, pp. 130–143. [CrossRef]
Bierman, B. , Treynor, C. , O'donnell, J. , Lawrence, M. , Chandra, M. , Farver, A. , von Behrens, P. , and Lindsay, W. , 2014, “Performance of an Enclosed Trough EOR System in South Oman,” Energy Procedia, 49, pp. 1269–1278. [CrossRef]
Bierman, B. , O'donnell, J. , Burke, R. , McCormick, M. , and Lindsay, W. , 2014, “Construction of an Enclosed Trough EOR System in South Oman,” Energy Procedia, 49, pp. 1756–1765. [CrossRef]
Wang, Y. , Zhang, L. , Deng, J. , Wang, Y. , Ren, S. , and Hu, C. , 2017, “An Innovative Air Assisted Cyclic Steam Stimulation Technique for Enhanced Heavy Oil Recovery,” J. Pet. Sci. Eng., 151, pp. 254–263. [CrossRef]
Wang, Y. , Ren, S. , Zhang, L. , Peng, X. , Pei, S. , Cui, G. , and Liu, Y. , 2018, “Numerical Study of Air Assisted Cyclic Steam Stimulation Process for Heavy Oil Reservoirs: Recovery Performance and Energy Efficiency Analysis,” Fuel, 211, pp. 471–483. [CrossRef]
Lu, C. , Zhao, W. , Liu, Y. , and Dong, X. , 2018, “Pore-Scale Transport Mechanisms and Macroscopic Displacement Effects of In-Situ Oil-in-Water Emulsions in Porous Media,” ASME J. Energy Resour. Technol., 140(10), p. 102904.
Zhou, D. , and Yang, D. , 2017, “Scaling Criteria for Waterflooding and Immiscible CO2 Flooding in Heavy Oil Reservoirs,” ASME J. Energy Resour. Technol., 139(2), p. 022909. [CrossRef]
Mohebbifar, M. , Ghazanfari, M. H. , and Vossoughi, M. , 2015, “Experimental Investigation of Nano-Biomaterial Applications for Heavy Oil Recovery in Shaly Porous Models: A Pore-Level Study,” ASME J. Energy Resour. Technol., 137(1), p. 014501. [CrossRef]
Ali, S. , and Meldau, R. , 1979, “Current Steamflood Technology,” J. Pet. Technol., 31(10), pp. 1332–1342. [CrossRef]
Ali, S. , 1982, “Steam Injection Theories—A Unified Approach,” SPE California Regional Meeting, San Francisco, CA, Mar. 24–26, SPE Paper No. 10746.
Liu, P. , Zheng, H. , and Wu, G. , 2017, “Experimental Study and Application of Steam Flooding for Horizontal Well in Ultraheavy Oil Reservoirs,” ASME J. Energy Resour. Technol., 139(1), p. 012908. [CrossRef]
Mozaffari, S. , Nikookar, M. , Ehsani, M. R. , Sahranavard, L. , Roayaie, E. , and Mohammadi, A. H. , 2013, “Numerical Modeling of Steam Injection in Heavy Oil Reservoirs,” Fuel, 112, pp. 185–192. [CrossRef]
Hossain, M. E. , 2018, “Dimensionless Scaling Parameters During Thermal Flooding Process in Porous Media,” ASME J. Energy Resour. Technol., 140(7), p. 072004. [CrossRef]
Al Hadabi, I. , Sasaki, K. , Sugai, Y. , and Yousefi-Sahzabi, A. , 2016, “Steam Trap Control Valve for Enhancing Steam Flood Performance in an Omani Heterogeneous Heavy Oil Field,” J. Unconv. Oil Gas Resour., 16, pp. 113–121. [CrossRef]
Pang, Z. , Liu, H. , and Zhu, L. , 2015, “A Laboratory Study of Enhancing Heavy Oil Recovery With Steam Flooding by Adding Nitrogen Foams,” J. Pet. Sci. Eng., 128, pp. 184–193. [CrossRef]
Hosseini, S. M. T. , Esfahani, S. , Doulatabadi, M. H. , Sarapardeh, A. H. , and Mohammadi, A. H. , 2017, “On the Evaluation of Steam Assisted Gravity Drainage in Naturally Fractured Oil Reservoirs,” Petroleum, 3(2), pp. 273–279. [CrossRef]
LIANG, G. , Shangqi, L. , Pingping, S. , Yang, L. , and Yanyan, L. , 2016, “A New Optimization Method for Steam-Liquid Level Intelligent Control Model in Oil Sands Steam-Assisted Gravity Drainage (SAGD) Process,” Pet. Explor. Develop., 43(2), pp. 301–307. [CrossRef]
Forshomi, Z. D. , Alva-Argaez, A. , and Bergerson, J. A. , 2017, “Optimal Design of Distributed Effluent Treatment Systems in Steam Assisted Gravity Drainage Oil Sands Operations,” J. Clean. Prod., 149, pp. 1233–1248. [CrossRef]
Ma, Z. , Leung, J. Y. , and Zanon, S. , 2017, “Practical Data Mining and Artificial Neural Network Modeling for Steam-Assisted Gravity Drainage Production Analysis,” ASME J. Energy Resour. Technol., 139(3), p. 032909. [CrossRef]
Koottungal, L. , 2014, “2014 Worldwide EOR Survey,” Oil Gas J., 112, pp. 79–91 http://www.ogj.com/articles/print/volume-112/issue-4/special-report-eor-heavy-oil-survey/2014-worldwide-eor-survey.html.
Suranto, A. , and Heru, P. S. , 2017, “Investigation of Multilevel Injector for Ramp-Up Process in Vertical Well Using Steam Assisted Gravity Drainage Method,” Energy Procedia, 105, pp. 4513–4518. [CrossRef]
Yuan, Z. , Liu, P. , Zhang, S. , Jiao, Y. , and Li, X. , 2017, “Experimental Study and Numerical Simulation of a Solvent-Assisted Start-Up for SAGD Wells in Heavy Oil Reservoirs,” J. Pet. Sci. Eng., 154, pp. 521–527.
Faradonbeh, M. R. , Harding, T. , Abedi, J. , and Hassanzadeh, H. , 2015, “Stability Analysis of Coupled Heat and Mass Transfer Boundary Layers During Steam–Solvent Oil Recovery Process,” Transp. Porous Media, 108(3), pp. 595–615. [CrossRef]
Nenniger, J. , and Nenniger, E. , 2005, “Method and Apparatus for Stimulating Heavy Oil Production,” Patent No. 6883607.
Leaute, R. P. , 2002, “Liquid Addition to Steam for Enhancing Recovery (LASER) of Bitumen With CSS: Evolution of Technology From Research Concept to a Field Pilot at Cold Lake,” SPE International Thermal Operations and Heavy Oil Symposium and International Horizontal Well Technology Conference, Calgary, AB, Canada, Nov. 4–7, SPE Paper No. 79011.
Nasr, T. , Beaulieu, G. , Golbeck, H. , and Heck, G. , 2003, “Novel Expanding Solvent-SAGD Process" ‘ES-SAGD’,” J. Can. Pet. Technol., 42(1), pp. 13–16.
Gupta, S. , Gittins, S. , and Picherack, P. , 2005, “Field Implementation of Solvent Aided Process,” J. Can. Pet. Technol., 44(11), pp. 8–13.
Al-Murayri, M. T. , Maini, B. B. , Harding, T. G. , and Oskouei, J. , 2016, “Multicomponent Solvent Co-Injection With Steam in Heavy and Extra-Heavy Oil Reservoirs,” Energy Fuels, 30(4), pp. 2604–2616. [CrossRef]
Li, S. , Li, Z. , and Sun, X. , 2017, “Effect of Flue Gas and n-Hexane on Heavy Oil Properties in Steam Flooding Process,” Fuel, 187, pp. 84–93. [CrossRef]
Mohsenzadeh, A. , Escrochi, M. , Afraz, M. , Karimi, G. , Al-Wahaibi, Y. , and Ayatollahi, S. , 2016, “Non-Hydrocarbon Gas Injection Followed by Steam–Gas Co-Injection for Heavy Oil Recovery Enhancement From Fractured Carbonate Reservoirs,” J. Pet. Sci. Eng., 144, pp. 121–130. [CrossRef]
Zhengbin, W. , Huiqing, L. , and Xue, W. , 2018, “Adaptability Research of Thermal–Chemical Assisted Steam Injection in Heavy Oil Reservoirs,” ASME J. Energy Resour. Technol., 140(5), p. 052901. [CrossRef]
Cole, J. T. , and Pnevmaticos, S. M. , 1983, “Canada's Solar Demonstration Programs: Results and Implications for the Future,” J. Can. Pet. Technol., 22(6).
Yegane, M. M. , Bashtani, F. , Tahmasebi, A. , Ayatollahi, S. , and Al-wahaibi, Y. M. , 2016, “Comparing Different Scenarios for Thermal Enhanced Oil Recovery in Fractured Reservoirs Using Hybrid (Solar-Gas) Steam Generators, a Simulation Study,” 78th EAGE Conference and Exhibition, Vienna, Austria, May 30–June 2, SPE Paper No. 180101.
Yegane, M. M. , Ayatollahi, S. , Bashtani, F. , and Romero, C. , 2015, “Solar Generated Steam Injection in Hamca, Venezuelan Extra Heavy Oil Reservoir; Simulation Study for Oil Recovery Performance, Economical and Environmental Feasibilities,” EUROPEC 2015, Madrid, Spain, June 1–4, SPE Paper No. 174305.
Mokheimer, E. M. A. , and Habib, M. A. , 2017, “Hybrid Solar Thermal Enhanced Oil Recovery System With Oxy-Fuel Combustor,” U.S. Patent No. 9,845,667B2.
Sandler, J. , Fowler, G. , Cheng, K. , and Kovscek, A. R. , 2014, “Solar-Generated Steam for Oil Recovery: Reservoir Simulation, Economic Analysis, and Life Cycle Assessment,” Energy Convers. Manage., 77, pp. 721–732. [CrossRef]
van Heel, A. P. , Van Wunnik, J. N. , Bentouati, S. , and Terres, R. , 2010, “The Impact of Daily and Seasonal Cycles in Solar-Generated Steam on Oil Recovery,” SPE EOR Conference at Oil and Gas West Asia, Paper No. 129225.
Afsar, C. , and Akin, S. , 2016, “Solar Generated Steam Injection in Heavy Oil Reservoirs: A Case Study,” Renewable Energy, 91, pp. 83–89. [CrossRef]
Glatz, G. , Hascakir, B. , Castanier, L. , Clemens, T. , and Kovscek, A. , 2011, “Kinetic Cell and Combustion Tube Results for a Central European Crude Oil,” SPE Annual Technical Conference and Exhibition, Denver, CO, Oct. 30–Nov. 2, SPE Paper No. SPE-146089-MS.
Ursenbach, M. , Moore, R. , and Mehta, S. , 2010, “Air Injection in Heavy Oil Reservoirs-a Process Whose Time Has Come (Again),” J. Can. Pet. Technol., 49(1), pp. 48–54. [CrossRef]
Koottungal, L. , 2008, “2008 Worldwide EOR Survey,” Oil Gas J., 106(15), p. 47.
Hansel, J. G. , Benning, M. A. , and Fernbacher, J. M. , 1984, “Oxygen in-Situ Combustion for Oil Recovery: Combustion Tube Tests,” J. Pet. Technol., 36(7), pp. 1139–1144. [CrossRef]
Adewusi, V. A. , and Greaves, M. , 1991, “Forward In Situ Combustion: Oil Recovery and Properties,” Fuel, 70(4), pp. 503–508. [CrossRef]
Onyekonwu, M. , and Falade, G. , 1989, “Recovery of Light Oil Using in Situ Combustion Thermal Recovery Methods,” Energy, 14(3), pp. 153–159. [CrossRef]
Zhang, X. , Liu, Q. , and Che, H. , 2013, “Parameters Determination During in Situ Combustion of Liaohe Heavy Oil,” Energy Fuels, 27(6), pp. 3416–3426. [CrossRef]
Mahinpey, N. , Ambalae, A. , and Asghari, K. , 2007, “In Situ Combustion in Enhanced Oil Recovery (EOR): A Review,” Chem. Eng. Commun., 194(8), pp. 995–1021. [CrossRef]
Cheih, C. , 1982, “State-of-the-Art Review of Fireflood Field Projects (Includes Associated Papers 10901 and 10918),” J. Pet. Technol., 34(1), pp. 19–36. [CrossRef]
Sarathi, P. , 1999, “In-Situ Combustion Handbook Principles and Practices,” National Petroleum Technology Office, Tulsa, OK, Report No. DOE/PC/91008-0374.
Akkutlu, I. Y. , and Yortsos, Y. C. , 2005, “The Effect of Heterogeneity on in-Situ Combustion: Propagation of Combustion Fronts in Layered Porous Media,” SPE J., 10(4), pp. 394–404. [CrossRef]
Fatemi, S. , Kharrat, R. , and Vossoughi, S. , 2008, “Feasibility Study of in-Situ Combustion (ISC) in a 2-D Laboratory-Scale Fractured System Using a Thermal Reservoir Simulator,” Second World Heavy Oil Congress (WHOC), Edmonton, AB, Canada, Paper No. No. 2008-449.
Tabasinejad, F. , Kharrat, R. , and Vossoughi, S. , 2006, “Feasibility Study of in-Situ Combustion in Naturally Fractured Heavy Oil Reservoirs,” International Oil Conference and Exhibition in Mexico, Cancun, Mexico, Aug. 31–Sept. 2, SPE Paper No. 103969.
Hart, P. R. , 2017, “Hydrocarbon Mobility and Recovery Through in-Situ Combustion With the Addition of Ammonia,” Patent No. 9574429.
Paurola, P. , Vindspoll, H. , Grande, K. V. , and Hofstad, K. H. , 2016, “In Situ Combustion Process With Reduced CO2 Emissions,” Patent No. 9470077.
Canas, C. , Gittins, S. , Gupta, S. , Sood, A. , and Wu, X. , 2016, “Hydrocarbon Recovery Facilitated by In Situ Combustion,” Patent No. 9284827.
Das, S. , 2014, “Method for the Elimination of the Atmospheric Release of Carbon Dioxide and Capture of Nitrogen From the Production of Electricity by In Situ Combustion of Fossil Fuels,” Patent Application No. 14/150359.
Warren, L. A. , Wickramathilaka, S. L. , Brown, D. A. , and Wheeler, T. J. , 2014, “Use of Foam With In Situ Combustion Process,” Patent No. 8776518. https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2014110157
Caruthers, R. M. , 1970, “High Temperature Oxidation of Crude Oil in Porous Media,” Society of Petroleum Engineers, Richardson, TX.
Rezaei, M. , Schaffie, M. , and Ranjbar, M. , 2014, “Kinetic Study of Catalytic in-Situ Combustion Processes in the Presence of Nanoparticles,” Energy Sources, Part A, 36(6), pp. 605–612. [CrossRef]
Habib, M. A. , and Mokheimer, E. M. A. , 2017, “Solar Power and Ion Transport-Based Enhanced Oil Recovery System and Method,” U.S. Patent No. 9540918 https://patents.google.com/patent/US9540918.
Gonçalves, L. I. B. , and Trevisan, O. V. , 2009, “Numerical Simulation of Combustion Lab Experiments on Wet Forward Combustion,” 20th International Congress of Mechanical Engineering, Gramado, Brazil, Nov. 15–20.
Bottia-Ramirez, H. , Aguillon-Macea, M. , Lizcano-Rubio, H. , Delgadillo-Aya, C. L. , and Gadelle, C. , 2017, “Numerical Modeling on In-Situ Combustion Process in the Chichimene Field: Ignition Stage,” J. Pet. Sci. Eng., 154, pp. 462–468.
Rahnema, H. , Barrufet, M. , and Mamora, D. D. , 2017, “Combustion Assisted Gravity Drainage–Experimental and Simulation Results of a Promising In-Situ Combustion Technology to Recover Extra-Heavy Oil,” J. Pet. Sci. Eng., 154, pp. 513–520.
Rezaei, M. , Schaffie, M. , and Ranjbar, M. , 2013, “Thermocatalytic In Situ Combustion: Influence of Nanoparticles on Crude Oil Pyrolysis and Oxidation,” Fuel, 113, pp. 516–521. [CrossRef]
Amanam, U. U. , and Kovscek, A. R. , 2017, “Analysis of the Effects of Copper Nanoparticles on in-Situ Combustion of Extra Heavy-Crude Oil,” J. Pet. Sci. Eng., 152, pp. 406–415. [CrossRef]
Avwaghwaruvwe, E. , 2010, “Numerical Simulation of Chemical Reaction of In-Situ Combustion Using SARA Fraction,” Master thesis, Delft University of Technology, Delft, The Netherlands.
Burger, J. G. , 1972, “Chemical Aspects of In-Situ Combustion-Heat of Combustion and Kinetics,” Soc. Pet. Eng. J., 12(5), pp. 410–422. [CrossRef]
Moschopedis, S. E. , and Speight, J. G. , 1975, “Oxidation of a Bitumen,” Fuel, 54(3), pp. 210–212. [CrossRef]
Babu, D. R. , and Cormack, D. E. , 1984, “Effect of Low-Temperature Oxidation on the Composition of Athabasca Bitumen,” Fuel, 63(6), pp. 858–861. [CrossRef]
Adegbesan, K. , Donnelly, J. , Moore, R. , and Bennion, D. , 1987, “Low-Temperature Oxidation Kinetic Parameters for In-Situ Combustion Numerical Simulation,” SPE Reservoir Eng., 2(4), pp. 573–582. [CrossRef]
Alexander, J. D. , Martin, W. L. , and Dew, J. N. , 1962, “Factors Affecting Fuel Availability and Composition During In Situ Combustion,” J. Pet. Technol., 14(10), pp. 1154–1164. [CrossRef]
Al-Saadoon, F. T. , 1970, “Experimental and Statistical Study of Residual Oil Saturation After Gas, Water, and Steam Drive, and Fuel Availability for the In-Situ Combustion Process,” Ph.D. thesis https://www.osti.gov/biblio/5964660.
Dechaux, J. , 1973, “The Negative Temperature Coefficient in the Oxidation of Hydrocarbons,” Oxid. Combust. Rev., 6, p. 75.
Moore, R. , Laureshen, C. , Ursenbach, M. , Mehta, S. , and Belgrave, J. , 1999, “Combustion/Oxidation Behavior of Athabasca Oil Sands Bitumen,” SPE Reservoir Eval. Eng., 2(6), pp. 565–571. [CrossRef]
Fassihi, M. R. , Meyers, K. O. , and Baslie, P. , 1990, “Low-Temperature Oxidation of Viscous Crude Oils,” SPE Reservoir Eng., 5(4), pp. 609–616. [CrossRef]
Fassihi, M. R. , Brigham, W. E. , and Ramey, H. J., Jr. , 1984, “Reaction Kinetics of In-Situ Combustion: Part 2—Modeling,” Soc. Pet. Eng. J., 24(4), pp. 408–416. [CrossRef]
Akin, S. , Kok, M. V. , Bagci, S. , and Karacan, O. , 2000, “Oxidation of Heavy Oil and Their SARA Fractions: Its Role in Modeling In-Situ Combustion,” SPE Annual Technical Conference and Exhibition, Dallas, TX, Oct. 1–14, SPE Paper No. 63230.
Kok, M. V. , and Okandan, E. , 1994, “Thermal Analysis of Crude Oil-Lignite Mixtures by Differential Scanning Calorimetry,” Fuel, 73(4), pp. 500–504. [CrossRef]
Cinar, M. , Castanier, L. M. , and Kovscek, A. R. , 2011, “Combustion Kinetics of Heavy Oils in Porous Media,” Energy Fuels, 25(10), pp. 4438–4451. [CrossRef]
Akkutlu, I. Y. , and Yortsos, Y. C. , 2003, “The Dynamics of in-Situ Combustion Fronts in Porous Media,” Combust. Flame, 134(3), pp. 229–247. [CrossRef]
Fassihi, M. R. , Brigham, W. E. , and Ramey, H. J., Jr. , 1984, “Reaction Kinetics of In-Situ Combustion—Part 1: Observations,” Soc. Pet. Eng. J., 24(4), pp. 399–407. [CrossRef]
Cavanzo, E. A. , Munoz Navarro, S. F. , Ordonez, A. , and Bottia Ramirez, H. , 2014, “Kinetics of Wet In-Situ Combustion: A Review of Kinetic Models,” SPE Heavy and Extra Heavy Oil Conference, Medellíin, Colombia, Sept. 24–26, SPE Paper No. 171134.
Adegbesan, K. , Donnelly, J. , Moore, R. , and Bennion, D. , 1986, “Liquid Phase Oxidation Kinetics of Oil Sands Bitumen: Models for In Situ Combustion Numerical Simulators,” AIChE J., 32(8), pp. 1242–1252. [CrossRef]
Sequera, B. , Moore, R. , Mehta, S. , and Ursenbach, M. , 2010, “Numerical Simulation of in-Situ Combustion Experiments Operated Under Low Temperature Conditions,” J. Can. Pet. Technol., 49(1), pp. 55–64. [CrossRef]
Hayashitani, M. , 1978, “Thermal Cracking of Athabasca Bitumen,” Ph.D. thesis, The University of Calgary, Calgary, AB, Canada.
Yang, X. , and Gates, I. D. , 2009, “Combustion Kinetics of Athabasca Bitumen From 1D Combustion Tube Experiments,” Nat. Resour. Res., 18(3), pp. 193–211. [CrossRef]
Belgrave, J. , Moore, R. , Ursenbach, M. , and Bennion, D. , 1993, “A Comprehensive Approach to In-Situ Combustion Modeling,” SPE Adv. Technol. Ser., 1(1), pp. 98–107. [CrossRef]
Kapadia, P. R. , Kallos, M. , Chris, L. , and Gates, I. D. , 2009, “Potential for Hydrogen Generation During In Situ Combustion of Bitumen,” EUROPEC/EAGE Conference and Exhibition, Amsterdam, The Netherlands, june 8–11, SPE Paper No. 122028.
Kalateh, R. , Ogg, L. , Charkazova, M. , and Gerogiorgis, D. I. , 2016, “A Database and Workflow Integration Methodology for Rapid Evaluation and Selection of Improved Oil Recovery (IOR) Technologies for Heavy Oil Fields,” Adv. Eng. Software, 100, pp. 176–197. [CrossRef]
Ali, H. M. K. , Hassan, M. A. A. , and Alkhider, M. D. M. , 2015, Optimization of Cyclic Steam Stimulation (CSS) Using (CMG) Software to Increase the Recovery Factor, University of Khartoum, Khartoum, Sudan.
Bottazzi, F. , Repetto, C. , Tita, E. , and Maugeri, G. , 2013, “Downhole Electrical Heating for Heavy Oil Enhanced Recovery: A Successful Application in Offshore Congo,” International Petroleum Technology Conference (IPTC), Beijing, China, Mar. 26–28, Paper No. IPTC-16858.
Gadelle, C. , Burger, J. , Bardon, C. P. , Machedon, V. , Carcoana, A. , and Petcovici, V. , 1981, “Heavy-Oil Recovery by In-Situ Combustion—Two Field Cases in Rumania,” J. Pet. Technol., 33(11), pp. 2057–2066.
Turta, A. T. , and Pantazi, I. G. , 1986, “Development of the in-Situ Combustion Process on an Industrial Scale at Videle Field, Rumania,” SPE Reservoir Eng., 1(6), pp. 556–564. [CrossRef]
McQueen, G. , Parman, D. , and Williams, H. , 2009, “Enhanced Oil Recovery of Shallow Wells With Heavy Oil: A Case Study in Electro Thermal Heating of California Oil Wells,” Petroleum and Chemical Industry Conference (PCIC), Anaheim, CA, Sept. 14–16.

Figures

Grahic Jump Location
Fig. 1

(a) Worldwide EOR market contribution through 7 years (adapted from [5]) and (b) EOR forecast in the Middle East up to 2050 (adapted from [6])

Grahic Jump Location
Fig. 2

Kinematic viscosity of gas-free oils as a function of temperature (adapted from [11])

Grahic Jump Location
Fig. 3

Nonthermal-enhanced oil recovery technologies [7]

Grahic Jump Location
Fig. 4

Ratio of different EOR methods used in projects around the world [12]

Grahic Jump Location
Fig. 5

Thermal EOR processes

Grahic Jump Location
Fig. 6

Schematic illustration of CSS

Grahic Jump Location
Fig. 7

Schematic illustration of steam flooding process

Grahic Jump Location
Fig. 8

Schematic illustration of SAGD process

Grahic Jump Location
Fig. 9

Schematic diagram of the hybrid solar thermal EOR system with oxy-fuel combustor, Patent number 9845667B2, Dec. 19, 2017 [83]

Grahic Jump Location
Fig. 10

Schematic illustration of in situ combustion process

Grahic Jump Location
Fig. 11

Schematic diagram for a solar-assisted EOR System [107]

Grahic Jump Location
Fig. 12

In situ combustion schematic temperature profile (adapted from Ref. [96])

Tables

Errata

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In