The aim of this research is to use the numerical analysis techniques to design deceleration devices for a blunt body. In this paper a qualitative analysis of the flow structure over a blunt body with and without multi-fins decelerator was shown. In some applications of aerodynamics, a deceleration of a moving body is required therefore the prediction and controlling of the drag is essential. The deceleration devices such as air bag or fins can be added to the body to increase the aerodynamics drag. For a supersonic speed, a flow around blunt body is complicated due to the detached shock wave, flow separation, boundary layer and their interactions. When a decelerator is integrated with the blunt body the flow is subject to sever change of aerodynamic forces and velocity. The results will show that adding a deceleration device will change the flow structure behind the body especially with regard to the pressure drag and wake. Results of contour plots of Mach number and static pressure for zero angles of attack will demonstrate that the aerodynamic forces and the velocity are changed when the deceleration device is integrated with the blunt body. A number of important conclusions follow from the current research. First, study of the actual flow configuration over a blunt body with a decelerator offers some insight into the complex flow phenomena. Second, adding the decelerator will increase the separation that will result in an increase of total drag.
Skip Nav Destination
ASME/JSME 2007 5th Joint Fluids Engineering Conference
July 30–August 2, 2007
San Diego, California, USA
Conference Sponsors:
- Fluids Engineering Division
ISBN:
0-7918-4288-6
PROCEEDINGS PAPER
Multi-Fins Decelerator for Blunt Body in Turbulent Flows
Khaled Alhussan
Khaled Alhussan
King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia
Search for other works by this author on:
Khaled Alhussan
King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia
Paper No:
FEDSM2007-37460, pp. 1883-1886; 4 pages
Published Online:
March 30, 2009
Citation
Alhussan, K. "Multi-Fins Decelerator for Blunt Body in Turbulent Flows." Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B. San Diego, California, USA. July 30–August 2, 2007. pp. 1883-1886. ASME. https://doi.org/10.1115/FEDSM2007-37460
Download citation file:
2
Views
0
Citations
Related Proceedings Papers
Related Articles
Aerothermodynamics of
a High-Pressure Turbine Blade With Very High Loading and Vortex
Generators
J. Turbomach (January,2012)
On the Physics of Heat Transfer and Aerodynamic Behavior of Separated Flow Along a Highly Loaded Low Pressure Turbine Blade Under Periodic Unsteady Wake Flow and Varying of Turbulence Intensity
J. Heat Transfer (May,2008)
On the Physics of Flow Separation Along a Low Pressure Turbine Blade Under Unsteady Flow Conditions
J. Fluids Eng (May,2005)
Related Chapters
Extended Surfaces
Thermal Management of Microelectronic Equipment, Second Edition
Extended Surfaces
Thermal Management of Microelectronic Equipment
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)