... of the separation vortex was moved to the midchord and formed a significant loss region. Thus, the tip leakage flow reduced the loss region, and the overall loss was reduced. axial compressor windmill condition internal flow CFD DES tip clearance Proceedings of the ASME 2022 Fluids Engineering...

... comparisons were examined. The experimental comparison benchmarked the temperature ratio of particles at varying thermal Stokes numbers against the experimental correlation shown in Bojdo et al. [1]. multiphase melting volume-of-fluid CFD Proceedings of the ASME 2022 Fluids Engineering Division...

... Abstract Forces acting on both gas and particle phases and the interaction between them and the liquid phase in liquid-gas-solid flow are examined via Computational Fluid Dynamics (CFD) and the results are compared with experimental data. A simplified methodology to simulate multiphase flow...

... components are inseparable. In general, the goal is to link physical processes to various components in the control volume assessments that are measurable in detailed computational fluid dynamics (CFD) models. The effort utilizes the Method of Manufactured Solutions (MMS) to verify detailed insight can...

.... The vortex rings tilt perpendicular to the main flow as they develop but dissipate due to the rotation of the high-velocity jet and transform into numerous elongated vortices. sweeping jet jet in cross flow vortex CFD Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting...

... for and understanding situations with bluff body wakes. CFD bluff body wake optimization Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting FEDSM2022 August 3-5, 2022, Toronto, Ontario, Canada FEDSM2022-87937 OPTIMIZATION OF AN ELLIPTICAL FAIRING IN THE WAKE OF A D-SHAPED BLUFF BODY...

... stall, both experiment and CFD(Computational Fluid flow rate coefficient =Q/(3600 b3d3u3t) Dynamics) calculations were conducted. In the experiment, two efficiency kinds of pump (one is original and another is with slit vanes) density [kg/m3] characteristics and time history of static pressure...

... Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021-62237 CFD ANALYSIS OF REFRIGERATION CYCLE EJECTOR Franz X. Forster Alexander E. Deravanessian Matthew J. Nazarian Univ. of Applied Sciences Calf. State Polytechnic Univ...

... during spraying and layer twin wire arc spray torch depositing a coating onto a substrate. formation of a coating. Simulations using ANSYS FLUENT FIGURE 1: SCHEMATIC OF THE TWAS PROCESS. Computational Fluid Dynamics (CFD) software were used to The TWAS process operates with two electrically conductive...

... Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021-65393 CFD ANALYSIS AND WIND TUNNEL TESTING OF HUMAN POWERED VEHICLE DRAG COEFFICIENTS Tony Estrada, Kevin R. Anderson, Ivan Gundersen, Chuck Johnston California State...

... Polytechnic Institute», Kyiv, Ukraine ABSTRACT NOMENCLATURE ultrasonic flow meter In present paper, the focus is given to possible ways of UFM computational fluid dynamics CFD increasing accuracy for existing ultrasonic time-of-flight water meters. We will consider transducers with coaxial reflectors 1...

... of the redesigned compressor has at 120K rpm, and proposed some design difficulties and increased 5% at design point. methods of this kind of compressor [5]. Zhang et al. carried out numerical and experimental research on low specific speed Keywords: Centrifugal compressor, CFD, Loss Analysis, centrifugal...

... CFD turbulence model multiphase flow HHSTT hypersonic supersonic high-speed test track Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021-65799 THREE-DIMENSIONAL TWO-PHASE FLOW SIMULATIONS OF WATER BRAKING...

... as a software in 2015 to $162B in 2020, as shown in Fig. 1 growing at as a service (SaaS) solution, which increases its accessibility least 6 times faster than what had been expected for IT and ease of use. Online fluid flow (CFD) simulation is used spending in that same time span [1]. This contributes...

... utilising highly sensitive acoustic sensors. Two series of numerical simulations utilising Computational Fluid Dynamics (CFD) – Reynolds-Averaged Navier-Stokes (RANS) model, were performed to accurately predict the rate of the oil spill and the corresponding trajectory to the free-surface at Reynolds number...

...Abstract Abstract In the oil and gas industry, sand particle erosion damage to elbows is a common problem. The ability to predict erosion patterns is of great importance for sizing lines, analyzing failures, and limiting production rates. Computational fluid dynamics (CFD) can be utilized...

..., with the downward thermal plume, the aspiration efficiency of small micro-particles increases significantly. lying mannequin aspiration efficiency CFD turbulent flow Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021-65652...

... actuation speeds and lower manufacturing costs (CAPEX). Computational Fluid Dynamics (CFD) simulations were performed to investigate the effect of flowing water (in the microfluidic channel) on the average absolute pressure and temperature of air in the actuation chamber. The CFD simulations were performed...

... students’ spirit of inquiry, and ultimately leads to a professional development opportunities beyond the classroom setting. CFD simulations assessment Ansys Fluent Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021...

... the best accuracy in terms of the mean velocity profile as well as drag partition across the range of packing densities. CFD DNS LES RANS Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021-65494 MODELING OF CUBE ARRAY...