Skip Nav Destination
1-9 of 9
Keywords: laminar flowClose
Proc. ASME. FEDSM2020, Volume 3: Computational Fluid Dynamics; Micro and Nano Fluid Dynamics, V003T05A001, July 13–15, 2020
Paper No: FEDSM2020-20042
... calculations, a T-junction model and a Y- junction model are analyzed. In both the models, there is one inlet pipe with two outlet pipes creating a symmetric bifurcation at some angle from the centerline of the inlet pipe. Naiver-Stokes (RANS) equations are solved for single phase laminar flow using...
Proc. ASME. FEDSM2020, Volume 3: Computational Fluid Dynamics; Micro and Nano Fluid Dynamics, V003T05A013, July 13–15, 2020
Paper No: FEDSM2020-20120
...Abstract Abstract This paper characterizes the mixing behavior of laminar flows within a circular pipe equipped with plain woven meshes or screens, acting as static mixers. In this quest, their performance was numerically investigated using the Lagrangian particle method in a commercial CFD...
Proc. ASME. FEDSM2020, Volume 3: Computational Fluid Dynamics; Micro and Nano Fluid Dynamics, V003T06A002, July 13–15, 2020
Paper No: FEDSM2020-20307
...). micromixer micro-PIV AC electroosmosis laminar flow sputtering EXPERIMENTAL AND NUMERICAL ANALYSIS OF FLUID FLOW THROUGH A MICROMIXER WITH THE PRESENCE OF ELECTRIC FIELD Md Fazlay Rubby, Mohammad Salman Parvez, Prosanto Biswas, Hasina Huq, Nazmul Islam Department of Electrical Engineering...
Proc. ASME. AJKFluids2019, Volume 5: Multiphase Flow, V005T05A043, July 28–August 1, 2019
Paper No: AJKFluids2019-5030
.... The solution is confined to flat-ended Taylor bubbles under laminar flow and constant heat flux conditions. The results compared reasonably well with the experimental data of other investigators. heat convection Taylor bubble mass transfer laminar flow analytical solution spherical-cap bubble...
Proc. ASME. FEDSM2002, Volume 1: Fora, Parts A and B, 209-214, July 14–18, 2002
Paper No: FEDSM2002-31313
... be clearly captured with the method. torque converter lock-up clutch CFD laminar flow thrust Proceedings of ASME FEDSM'02 2002 ASME Fluids Engineering Division Summer Meeting Montreal, Quebec, Canada, July 14 18 O N jir an of -s -4 f.it of t stabl incre capt Keyw flow INT wide a co been quite...
Proc. ASME. HT-FED2004, Volume 2, Parts A and B, 1333-1338, July 11–15, 2004
Paper No: HT-FED2004-56878
...Proceedings of HTFED04 2004 ASME Y O ha B e sometimes humidified or dehumidified. Comfort conditions in air-conditioned rooms require that tempera 1oC and 0.15 m develop tight bu require tempera require Th distribu of buoy investig laminar flow at and goe INTRO A d 0.1-0.2 conside buildin Fro very...
Proc. ASME. HT-FED2004, Volume 1, 541-552, July 11–15, 2004
Paper No: HT-FED2004-56750
... of the present study is to investigate the characteristics of laminar combined free - and - forced convection in the entrance region of a horizontal pipe of constant surface temperature with simultaneous development of fluid velocity and temperature. Heat transfer laminar flow convection free...
Proc. ASME. FEDSM2003, Volume 2: Symposia, Parts A, B, and C, 1199-1204, July 6–10, 2003
Paper No: FEDSM2003-45292
.... The turbulent flow cases were solved using k –ω and Reynolds Stress models. The flow properties are calculated for both Newtonian and non-Newtonian fluids. The calculated pressure drop is in good agreement with existing experimental data. Static mixer Laminar flow Turbulent flow Newtonian Fluid Non...
Proc. ASME. FEDSM2006, Volume 1: Symposia, Parts A and B, 1071-1076, July 17–20, 2006
Paper No: FEDSM2006-98104
...- and Macromixing Laminar Flow Mass Transfer Laser Induced Fluorescence Particle Image Velocimetry interrelation of macro- and micromixing subject to the local dissipation of energy. Keywords: Micro- and Macromixing, Laminar Flow, Mass Transfer, Laser Induced Fluorescence, Particle Image Velocimetry...