An extractant impregnated resin (EIR) was prepared by impregnation of Aliquat 336 into Amberlite XAD-4 for separation of technetium from rhodium in nitric acid solution. The prepared EIR showed high preference for rhenium (chemical analogue of technetium) over rhodium. The adsorption isotherms for rhenium were described well by Langmuir equation in both the single and multi-component systems. Maximum adsorption capacities obtained by modelling the isotherms of rhenium were 2.01 meq g−1 and 1.97 meq g−1 for the single and the multi-component systems, respectively. Column tests were also performed to confirm the separation efficiency of rhenium using a jacketed glass column (φ11 × L 150). The EIR column showed successful separation of rhenium with the breakthrough volume of about 122 BV for the breakthrough concentration of 0.08. Also the breakthrough data were modelled successfully by assuming a homogeneous diffusion model in the particle phase. The diffusivities obtained from the modelling were in the order of 10−7 cm2 min−1 for a rhenium. The rhenium adsorbed on the bed could be eluted with a high purity by using a nitric acid solution.
- Nuclear Engineering Division
Separation of Technetium in Nitric Acid Solution With an Extractant Impregnated Resin
- Views Icon Views
- Share Icon Share
- Search Site
Moon, J, Lee, E, Jung, C, & Lee, B. "Separation of Technetium in Nitric Acid Solution With an Extractant Impregnated Resin." Proceedings of the 14th International Conference on Nuclear Engineering. Volume 5: Safety and Security; Low Level Waste Management, Decontamination and Decommissioning; Nuclear Industry Forum. Miami, Florida, USA. July 17–20, 2006. pp. 527-533. ASME. https://doi.org/10.1115/ICONE14-89797
Download citation file: