...C. Y. Wang Fluid flow in saturated porous media imbedded with a solid inclusion may be described by the Darcy–Brinkman equation. When the Darcy number is small, a boundary-layer theory, similar to Prandtl's theory for viscous flow, is established. The pressure and shear forces are predicted...

... of the pipe. The inlet-filled region concept is adopted. In the inlet region, the boundary layer thickness increases until the size of the plug flow area reaches the fully developed flow size. The model converges to the fully developed solution in the filled region. The model provides the velocity, pressure...

... and Head Generation (Absorption) in a Thermal Boundary Layer of a Non-Newtonian Fluid Over a Continuously Moving Permeable Flat Plate ,” J. Appl. Mech Tech. Phys. , 50 ( 5 ), pp. 819 – 825 . 10.1007/s10808-009-0111-1 [3] Sakiadis , B. C. , 1961 , “ Boundary-Layer Behavior on Continuous Solid...

... of erroneous vectors ( V  < 0.2 V max ). At first PIV measurements presented ( t  = 1.75 s), turbulization process begins in the flow (Fig. 2 and Ref. [ 26 ]). In the core region of the pipe, the velocity profile is uniform, and near the wall, the thickness of the boundary layer is increasing in time...

...: Meng Wang. 28 02 2012 29 01 2013 The 3D flow structure induced by a normal shock-wave/boundary-layer interaction in a transonic diffuser is experimentally and computationally investigated. In the diffuser, the shock wave is located in the diverging section. The experiments are done...

... at the rod wall in the gap position. 28 06 2009 10 06 2011 19 07 2011 19 07 2011 boundary layer turbulence external flows flow measurement laminar flow pipe flow rods (structures) The polar distribution of wall pressures around a circular tube of a cell bundle in yawed...

... into kinetic energy in order to act on the flow boundary layer. This paper presents our contribution to such an investigation concerning an electrohydrodynamic actuator consisting of several sinusoidal dielectric barrier discharges. First, the ionic wind induced by this actuator was measured with a pressure...

...Edward B. White; Jason A. Schmucker Predicting the runback threshold for liquid drops in aerodynamic boundary layers is a challenging problem with numerous applications including aircraft icing simulations. The critical parameters that govern drop runback are investigated in this experiment...

...Yoshifumi Jodai; Yoshikazu Takahashi; Masashi Ichimiya; Hideo Osaka An experimental investigation has been made on a turbulent boundary layer near the trailing edge on a long flat plate. The flow was controlled by an additional splitter plate fitted to the trailing edge along the wake centerline...

... solution of the governing equations permit to analyze the influence of the governing parameters, the Reynolds and Péclet numbers. For both geometries, we deduce a scaling law for the boundary layer thickness as a function of the Péclet number. We also compare the numerical solutions with asymptotic...

...Edmond J. Walsh; Kevin P. Nolan; Donald M. McEligot; Ralph J. Volino; Adrian Bejan Conditionally-sampled boundary layer data for an accelerating transitional boundary layer have been analyzed to calculate the entropy generation rate in the transition region. By weighing the nondimensional...

... of cavitation damage. In the present, study the developing flow region in a stepped channel with a slope 1v:0.8h is characterized using a particle image velocimetry technique. An expression for the growth of the boundary layer thickness is proposed based on the streamwise distance from the channel crest...

...Jingyu Ran; Li Zhang; Qiang Tang; Mingdao Xin The boundary-layer feature and the forces on the particle are analyzed in detail, and the motion parameters of the particle in the gas-solid rotary flow are divided into two parts according to the r - z meridian and r - θ cross section. The Lagrange...