... fluid reduces the interfacial stability. The consistency coefficient and viscosity of power-law fluid both have a stabilizing character. For the computation of linear heat transfer condition, the expression of H ( z = ξ ) will be expanded about ξ = 0 in Maclaurin series as (14...

... that the ice accretes in a direction normal to the airfoil surface. The governing Reynolds-averaged Navier–Stokes (RANS) conservation equations along with the energy and continuity equations are solved to produce the velocity and temperature fields. A convective film heat transfer coefficient is computed based...

... and heat transfer. An adopted turbulence model was validated through an experiment as described in the literature. Numerical results of pressure coefficient and Nusselt number were obtained for cases with and without filet profiles for variable jet Reynolds numbers and conical angles. Results showed...

...S. Dholey The combined influence of normal transpiration and tangential movement of a porous surface on the unsteady separated stagnation-point flow and heat transfer of a viscous fluid is studied. This study is based on five physical parameters, namely (i) flow strength parameter a, (ii) suction...

... , A. S. , 1977 , “ Heat and Mass Transfer on a Stretching Sheet With Suction or Blowing ,” Can. J. Chem. Eng. , 55 , pp. 744 – 746 . 10.1002/cjce.5450550619 [6] Fang , T. , 2008 , “ Flow and Heat Transfer Characteristics of the Boundary Layers Over a Stretching Surface With a Uniform...

... behavior, and one-degree-of-freedom simulation, for an elastic cylinder, which can vibrate freely in a flow field, is only valid for cases far from soft lock-in range. cylinder flow-induced oscillation lock-in heat transfer Flow-induced vibrations of structures are of particular interest...

... Zhou. 14 12 2011 16 07 2012 In this paper, we investigate the influence of temperature-dependent fluid properties on the flow and heat transfer characteristics of an electrically conducting dusty fluid over a stretching sheet. Temperature-dependent fluid properties are assumed...

... and also show that the heat transfer rate increases via the increasing of the injection Reynolds number, the power law index, and the cross viscosity parameter. This infers that the nonisothermal surfaces promote higher heat transfer rates and also indicates that viscoelastic fluids display high heat...

... rotor revealed the presence of negative fluid stiffness that was monotonically related to both flow and speed. Finally, conjugate heat transfer analysis predicted temperature rise adjacent to the motor to be inversely proportional to the length, but not exceeding ∼2 °C over the intended range...

... Wylie , E. B. , Streeter , V. L. , and Suo , L. , 1993 , Fluid Transients in Systems , Prentice-Hall Inc. , Englewood Cliffs, NJ . 21 Weigand , B. , 2004 , Analytical Methods for Heat Transfer and Fluid Flow Problems , Springer-Verlag , Berlin, Heidelberg . 22...

... 07 2011 23 08 2011 23 08 2011 external flows flow simulation heat transfer mass transfer numerical analysis rotational flow turbulent diffusion rotating circular cylinder mass transfer turbulence direct numerical simulation Schmidt number Understanding heat...

... total References 1 Chiou , J. P. , 1978 , “ Thermal Performance Deterioration in Crossflow Heat Exchanger Due to the Flow Nonuniformity ,” ASME J. Heat Transfer , 100 , pp. 580 – 587 . 10.1115/1.3450860 2 Shah , R. K. , and London , A. L. , 1980 , “ Effects...

... ( q = 25   kW   m − 2 ) 10 08 2010 31 01 2011 15 03 2011 15 03 2011 ammonia bubbles flow simulation heat transfer mixing pattern formation pumps two-phase flow water bubble pump flow pattern void fraction simulation A bubble...

... parameters. A comparison of the present results with the existing numerical solution is discussed in a limiting sense. 12 11 2010 19 01 2011 22 02 2011 22 02 2011 convergence of numerical methods flow simulation heat transfer microfluidics nonlinear differential equations...

..., but taking gas flow rate measurements is more difficult and time consuming. flow measurement heat transfer laminar flow microchannel flow 29 03 2010 12 11 2010 22 12 2010 22 12 2010 2010 American Society of Mechanical Engineers ...

... in internal flow channels to increase heat transfer augmentation through high turbulence and increased surface area. The flow fields in these obstructed channels are difficult to predict, so these measurements can be used to directly compare with predicted drag and lift forces. Through testing...

... of the jet. In addition to the computational approach, a number of analytical solutions are presented and compared with the computational results. 22 12 2009 16 06 2010 16 08 2010 16 08 2010 heat transfer jets pattern formation pipe flow Secondary flows are generated...

... static pressure variation with the distance along the chamber length is measured and calculated at different Reynolds numbers and inlet flow angles. The average heat transfer with Reynolds number at different values of the inlet flow angle is obtained. The velocity vectors are presented and Reynolds...

.... , and Delichatsios , M. A. , 2003 , “ New Evaluation of the k-ε Turbulence Model for Free Buoyant Plumes ,” Numer. Heat Transfer, Part A 1040-7782 , 43 , pp. 731 – 751 . 10.1080/713838127 Sangras , R. , Dai , Z. and Faeth , G. M. , 1998 , “ Mixing Structure of Plane Self-Preserving...

... characteristics for different values of Prandtl number (Pr), local Grashof number Gr x , and local convective heat transfer parameter Bi x are graphed and tabulated. A comparison with previously published results on special case of the problem shows excellent agreement. Temperature profiles for Pr...