In gas turbine combustors, optimum arrangement between a fuel nozzle and a swirler/prefilmer module must be sought to achieve satisfactory ignition and stability characteristics in addition to reduced level of emissions. However, due to thermal expansion of the combustor or misalignment of the fuel nozzle, the location of a fuel nozzle may vary. Displacement of a fuel nozzle may change the amount of fuel injected to the pre-filming device (usually the inner swirler wall) and the location of attachment, which in turn affects the thickness of pre-filming liquid sheet on the wall. As a result, the spray structure formed by pre-filming airblast atomization may be significantly changed. An experimental investigation is carried out to study the effects of fuel nozzle displacement on the structure of a spray formed by a dual orifice pressure atomizer and a counter-rotating dual swirler. The inner wall of the swirler is designed to be used as a pre-filming device. The behavior of droplets, the flow characteristics of the swirling air flow, and the interaction between droplets and the flow are studied. Optical diagnostic methods including a flow visualization and an Adaptive Phase/Doppler technique are used. Distributions of droplet size, number density, and liquid phase volume flux are presented for various fuel nozzle displacements, in addition to gas phase velocity.
Effects of Fuel Nozzle Displacement on Pre-Filming Airblast Atomization
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Stockholm, Sweden, Jun. 2–5, 1998; ASME Paper 98-GT-360. Manuscript received by IGTI Mar. 19, 1998; final revision received by the ASME Headquarters Oct. 20, 1999. Associate Technical Editor: R. Kielb.
- Views Icon Views
- Share Icon Share
- Search Site
Han , Y. M., Seol , W. S., Lee, D. S., Yagodkin, V. I., and Jeung, I. S. (October 20, 1999). "Effects of Fuel Nozzle Displacement on Pre-Filming Airblast Atomization ." ASME. J. Eng. Gas Turbines Power. January 2001; 123(1): 33–40. https://doi.org/10.1115/1.1335480
Download citation file: