The use of magnetic bearing in industrial applications has increased due to their unique properties. Nowadays efficiency and predictability in handling rotors on magnetic bearings is asked with the same standard as conventional rotors on oil or roller bearings. First of all one must be aware of the special technical properties of magnetic bearing designs. The dynamic behavior of the rotor combined with requirements of the application define the desired bearing characteristic. With modern tools covering the mechanical aspects as well as the electronic controllers and their digital implementation on a DSP, these properties can be designed. However, despite the use of such efficient tools engineering practice is needed. Therefore this paper summarizes the major steps in the control design process of industrial applications. Three rotors supported on magnetic bearing with their specific dynamic behavior are presented: a very small high speed spindle (120,000 rpm); a small industrial turbo molecular pump rotor (36,000 rpm); and a large multistage centrifugal compressor (600 to 6300 rmp). The results of the analyses and their experimental verification are given.
Skip Nav Destination
Article navigation
October 2002
Technical Papers
Three Practical Examples of Magnetic Bearing Control Design Using a Modern Tool
M. Spirig,
M. Spirig
Delta JS AG, Technoparkstr. 1, Zurich CH-8005, Switzerland
Search for other works by this author on:
J. Schmied,
J. Schmied
Delta JS AG, Technoparkstr. 1, Zurich CH-8005, Switzerland
Search for other works by this author on:
P. Jenckel,
P. Jenckel
LUST Antriebstechnik, Lahnan D-35633, Germany
Search for other works by this author on:
U. Kanne
U. Kanne
LUST Antriebstechnik, Lahnan D-35633, Germany
Search for other works by this author on:
M. Spirig
Delta JS AG, Technoparkstr. 1, Zurich CH-8005, Switzerland
J. Schmied
Delta JS AG, Technoparkstr. 1, Zurich CH-8005, Switzerland
P. Jenckel
LUST Antriebstechnik, Lahnan D-35633, Germany
U. Kanne
LUST Antriebstechnik, Lahnan D-35633, Germany
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Munich, Germany, May 8–11, 2000; Paper 00-GT-407. Manuscript received by IGTI Nov. 1999; final revision received by ASME Headquarters Feb. 2000. Associate Editor: D. Wisler.
J. Eng. Gas Turbines Power. Oct 2002, 124(4): 1025-1031 (7 pages)
Published Online: September 24, 2002
Article history
Received:
November 1, 1999
Revised:
February 1, 2000
Online:
September 24, 2002
Citation
Spirig , M., Schmied, J., Jenckel , P., and Kanne, U. (September 24, 2002). "Three Practical Examples of Magnetic Bearing Control Design Using a Modern Tool ." ASME. J. Eng. Gas Turbines Power. October 2002; 124(4): 1025–1031. https://doi.org/10.1115/1.1417483
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Controlling Journal Bearing Instability Using Active Magnetic Bearings
J. Eng. Gas Turbines Power (January,2010)
Identification of Rotordynamic Forces in a Flexible Rotor System Using Magnetic Bearings
J. Eng. Gas Turbines Power (March,2008)
An Active Auxiliary Bearing Control Strategy to Reduce the Onset of Asynchronous Periodic Contact Modes in Rotor/Magnetic Bearing Systems
J. Eng. Gas Turbines Power (May,2010)
On the Evolution of Passive Magnetic Bearings
J. Tribol (April,2022)
Related Proceedings Papers
Related Chapters
Introduction
Design of Mechanical Bearings in Cardiac Assist Devices
Summary and Conclusions
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications
Unbalance
Fundamentals of Rotating Machinery Diagnostics