Abstract

Vanadium alloys, especially V-Cr-Ti alloys, are candidates for first wall and blanket structures of fusion reactors. However, a major vulnerability of this class of alloys is the affinity for oxygen and other interstitial solutes. Oxygen, nitrogen, carbon, and hydrogen can severely harden and embrittle vanadium alloys. Oxygen is particularly troublesome because of its prevalence and its relatively high diffusivity. In determining creep behavior, the effects of oxygen must be understood. In the present study, specimens, in the form of pressurized tubes, were exposed to liquid lithium, the coolant of choice for vanadium systems, at temperatures of 665, 765, and 800°C. Under these conditions, oxygen is removed from the vanadium alloy by the lithium. The data produced were compared with data from similar specimens tested in a high vacuum environment, where the oxygen level in the alloy is expected to slowly increase, at Pacific Northwest National Laboratory in order to evaluate the effect of oxygen. The Li-exposure resulted in higher creep rates and shorter rupture times. The effect was most clear at 800°C, where deformations 4–6 times higher were observed for the Li-exposed specimens.

References

1.
Piet
,
S. J.
, “
Safety and Environmental Challenges in Materials Selection
,”
Journal of Nuclear Materials
 0022-3115, Vols.
141–143
,
1986
, pp.
65
-
72
.
2.
Smith
,
K. F.
, “
Development of Vanadium Alloys for Reactor Application. Part I. Evaluation
,”
Reactive Metals
,
W. R.
Clough
, Ed.,
Interscience Publishers
,
New York
,
1959
, pp.
403
-
414
.
3.
Van Thyne
,
R. J.
, “
Development of Vanadium Alloys for Reactor Application. Part II. Mechanical Properties
,”
Reactive Metals
,
W. R.
Clough
, Ed.,
Interscience Publishers
,
New York
,
1959
, pp.
415
-
427
.
4.
Loomis
,
B. A.
,
Nowicki
,
L. J.
, and
Smith
,
D. L.
, “
Effect of Neutron Irradiation on Tensile Properties of V-Cr-Ti Alloys
,”
Journal of Nuclear Materials
 0022-3115, Vols.
212–215
,
1994
, pp.
790
-
793
.
5.
Kainuma
,
T.
,
Iwao
,
N.
,
Suzuki
,
T.
, and
Watanabe
,
R.
, “
Effects of Oxygen, Nitrogen, and Carbon Additions on the Mechanical Properties of Vanadium and V/Mo Alloys
,”
Journal of Nuclear Materials
 0022-3115, Vol.
80
,
1979
, pp.
339
-
347
.
6.
Chung
,
H. M.
,
Loomis
,
B. A.
, and
Smith
,
D. L.
, “
Properties of Vanadium-Based Alloys Irradiated in the Dynamic Helium Charging Experiment
,”
Journal of Nuclear Materials
 0022-3115, Vols.
233–237
,
1996
, pp.
466
-
475
.
7.
Schober
,
T.
and
Braski
,
D. N.
, “
The Microstructure of Selected Annealed Vanadium-Base Alloys
,”
Metallurgical Transactions A
, Vol.
20
,
1989
, pp.
1927
-
1932
.
8.
Smith
,
D. L.
and
Natesan
,
K.
Influence of Nonmetallic Impurity Elements on the Compatibility of Liquid Lithium with Potential CTR Containment Materials
,”
Nuclear Technology
 0029-5450, Vol.
22
,
1974
, pp.
392
-
404
.
9.
Kurtz
,
R. J.
and
Hamilton
,
M. L.
, “
Biaxial Thermal Creep of V-4Cr-4Ti at 700°C and 800°C
,”
Journal of Nuclear Materials
 0022-3115, Vols.
283–287
,
2000
, pp.
628
-
632
.
10.
Smith
,
D. L.
,
Chung
,
H. M.
,
Loomis
,
B. A.
, and
Tsai
,
H.-C.
, “
Reference Vanadium Alloy V-4Cr-4Ti for Fusion Application
,”
Journal of Nuclear Materials
 0022-3115, Vols.
233–237
,
1996
, pp.
356
-
363
.
11.
Grossbeck
,
M. L.
,
Klueh
,
R. L.
,
Cheng
,
E. T.
,
Peterson
,
J. R.
,
Woolery
,
M. R.
, and
Bloom
,
E. E.
, “
Analysis of V-Cr-Ti Alloys in Terms of Activation of Impurities
,”
Journal of Nuclear Materials
 0022-3115, Vols.
258–263
,
1998
, pp.
1778
-
1783
.
12.
Crandall
,
D. L.
,
Marts
,
D. J.
,
Reed
,
T. R.
, and
Smolik
,
G. R.
, “
Ammonia Cleanup of Lithium-Containing Components
,”
Space Nuclear Power Systems 1987
,
M. S.
El-Genk
, and
M. D.
Hoover
, Eds.,
Orbit Book
,
Malabar, FL
,
1988
, pp.
457
-
464
.
13.
Natesan
,
K.
,
Soppet
,
W. K.
, and
Rink
,
D. L.
, “
Uniaxial Creep Behavior of V-4Cr-4Ti Alloy
,”
Fusion Reactor Materials Semiannual Progress Report for Period Ending June 30, 2000
, DOE/ER/0313/28,
Oak Ridge National Laboratory
, Oak Ridge, TN,
2000
, pp.
39
-
47
.
14.
Gilbert
,
E. R.
and
Blackburn
,
L. D.
, “
Creep Deformation of 20 Percent Cold Worked Type 316 Stainless Steel
,”
Transactions of ASME, Journal of Engineering Materials and Technology
, Vol.
99
Series H, No.
2
,
1977
, pp.
168
-
180
.
15.
Garofalo
,
Frank
,
Fundamentals of Creep and Creep-Rupture in Metals
,
The Macmillan Company
,
New York
,
1965
, pp.
50
-
51
.
16.
Kurtz
,
R. J.
,
Ermi
,
A. M.
, and
Matsui
,
H.
, “
An Update on Biaxial Thermal Creep of Vanadium Alloys
,”
Fusion Materials Semiannual Progress Report for Period Ending December 31, 2001
, DOE/ER/313/31,
2002
, pp.
7
-
16
.
17.
Gittus
,
J.
,
Creep, Viscoelasticity and Creep Fracture in Solids
,
John Wiley and Sons
,
New York
,
1975
, pp.
14
-
41
.
18.
Schirra
,
M.
,
Das Zeitstandfestigkeits-und Kriechverhalten von Vanadin-Basis-Legierungen
, KfK 2440,
Kernforschungszentrum Karlsruhe
,
1989
, pp. 57,
79
-
82
, 86,
147
-
148
.
19.
Gold
,
R. E.
,
Harrod
,
D. L.
,
Ammon
,
R. L.
,
Buckman
,
R. W.
, and
Svedberg
,
R. C.
,
Technical Assessment of Vanadium-Base Alloys for Fusion Reactor Applications
, Vol.
2
,
Westinghouse Electric Corp.
,
1978
, pp. 79,
82
-
83
.
20.
Larson
,
F. R.
and
Miller
,
J.
, “
A Time-Temperature Relationship for Rupture and Creep Stresses
,”
Transactions of ASME
, Vol.
74
,
1952
, pp.
765
-
775
.
21.
Smith
,
D. L.
and
Natesan
,
K.
, “
Influence of Nonmetallic Impurity Elements on the Compatibility of Liquid Lithium with Potential CTR Containment Materials
,”
Nuclear Technology
 0029-5450, Vol.
22
,
1974
, pp.
392
-
404
.
This content is only available via PDF.
You do not currently have access to this content.