Skip Nav Destination
Issues
Research Papers
Decing Salt-Scaling Resistance: Laboratory and Field Evaluation of Concrete Containing up to 70 % Class C and Class F Fly Ash
J. ASTM Int.. July 2005, 2(7): 1–12.
doi: https://doi.org/10.1520/JAI11912
Use of ACR Method to Estimate Closure and Residual Stress Free Small Crack Growth Data
J. ASTM Int.. July 2005, 2(7): 1–13.
doi: https://doi.org/10.1520/JAI12023
How Fast Do Winter Sports Participants Travel on Alpine Slopes?
J. ASTM Int.. July 2005, 2(7): 1–8.
doi: https://doi.org/10.1520/JAI12092
Using Signal Detection Theory as a Model to Evaluate Release/Retention Criteria in Alpine Skiing
J. ASTM Int.. July 2005, 2(7): 1–12.
doi: https://doi.org/10.1520/JAI12095
Development of Electronic Textiles to Transport Data and Power in Future U.S. Military Protective Clothing Systems
J. ASTM Int.. July 2005, 2(7): 1–9.
doi: https://doi.org/10.1520/JAI12104
Fluorescence Imaging for Investigating the Efficiency of Formulations, Adjuvants, and Application Systems
J. ASTM Int.. July 2005, 2(7): 1–10.
doi: https://doi.org/10.1520/JAI12159
Improved Formulations through Synergistic Combinations Based on Alkyl Glucosides
J. ASTM Int.. July 2005, 2(7): 1–10.
doi: https://doi.org/10.1520/JAI12160
Applications of Ether Amine Surfactants in Agricultural Formulations: The Known and Unexplored
J. ASTM Int.. July 2005, 2(7): 1–11.
doi: https://doi.org/10.1520/JAI12172
New Value-Added Polymeric Dispersants and Uses Thereof in Agricultural Formulations
J. ASTM Int.. July 2005, 2(7): 1–14.
doi: https://doi.org/10.1520/JAI12180
Statistical Significance of the Restrained Slab Test for Quantifying Plastic Cracking in Fiber Reinforced Concrete
J. ASTM Int.. July 2005, 2(7): 1–18.
doi: https://doi.org/10.1520/JAI12242
Microstructural Stability of M5™ Alloy Irradiated up to High Neutron Fluences
J. ASTM Int.. July 2005, 2(7): 1–24.
doi: https://doi.org/10.1520/JAI12332
Temperature and Strain Rate Effects on Zr-1%Nb Alloy Deformation
O Bocharov, S Zavodchikov, V Belov, A Kabanov, V Kotrekhov, V Rozhdestvenski, V Filippov, A Losistskiy, A Shikov
J. ASTM Int.. July 2005, 2(7): 1–15.
doi: https://doi.org/10.1520/JAI12335
Development of Fuel Clad Materials for High Burn-up Operation of LWR
J. ASTM Int.. July 2005, 2(7): 1–9.
doi: https://doi.org/10.1520/JAI12371
Modeling the Effects of Oversize Solute Additions on Radiation-Induced Segregation in Austenitic Stainless Steels
J. ASTM Int.. July 2005, 2(7): 1–13.
doi: https://doi.org/10.1520/JAI12402
Damage Dependence of Irradiation Deformation of Zr-2.5Nb Pressure Tubes
J. ASTM Int.. July 2005, 2(7): 1–21.
doi: https://doi.org/10.1520/JAI12432
Recent Surveillance Data and a Revised Embrittlement Correlation
J. ASTM Int.. July 2005, 2(7): 1–10.
doi: https://doi.org/10.1520/JAI12449
Effect of Surface Reaction Layer on Three-Point Flexure Bond Strength of Resin Composite to Cast Ti and Ti-6Al-7Nb
J. ASTM Int.. July 2005, 2(7): 1–7.
doi: https://doi.org/10.1520/JAI12782
Comparison of the Corrosion Fatigue Characteristics of CP Ti-Grade 4, Ti-6Al-4V ELI, Ti-6Al-7Nb, and Ti-15Mo
J. ASTM Int.. July 2005, 2(7): 1–19.
doi: https://doi.org/10.1520/JAI12786
Use of a TG/DTA/Raman System to Monitor Dehydration and Phase Conversions
J. ASTM Int.. July 2005, 2(7): 1–10.
doi: https://doi.org/10.1520/JAI12790
Comparison of Stress Corrosion Cracking and Corrosion Fatigue (Anodized and Non-Anodized Grade 4 CP Ti)
J. ASTM Int.. July 2005, 2(7): 1–17.
doi: https://doi.org/10.1520/JAI12809
Influence of Exposure Conditions on Bacterial Adhesion to Zirconium Alloys
EA Yamokoski, BW Buczynski, N Stojilovic, JW Seabolt, LM Bloe, R Foster, N Zito, MM Kory, RP Steiner, RD Ramsier
J. ASTM Int.. July 2005, 2(7): 1–14.
doi: https://doi.org/10.1520/JAI12812
A Methodology to Fabricate Titanium and Stainless Steel Wear Debris for Experimental Use: A Comparison of Size, Shape, and Chemistry
J. ASTM Int.. July 2005, 2(7): 1–9.
doi: https://doi.org/10.1520/JAI12814
Impact Characterization of Sub-Size Charpy V-Notch Specimens Prepared from Full-Size Certified Reference Charpy V-Notch Test Pieces
J. ASTM Int.. July 2005, 2(7): 1–9.
doi: https://doi.org/10.1520/JAI12873
Extrapolation of Fracture Toughness Data for HT9 Irradiated at 360–390°C
J. ASTM Int.. July 2005, 2(7): 1–12.
doi: https://doi.org/10.1520/JAI12882
Protective Window Safety Films: A Case Study in ASTM All-Hazard Building Code Standards
J. ASTM Int.. July 2005, 2(7): 1–9.
doi: https://doi.org/10.1520/JAI12893
Characterizing Dynamic Fracture Behavior of Adhesive Joints under Quasi-Static and Impact Loading
J. ASTM Int.. July 2005, 2(7): 1–19.
doi: https://doi.org/10.1520/JAI12955
The Study of Bond Strength and Bond Durability of Reactive Powder Concrete
J. ASTM Int.. July 2005, 2(7): 1–10.
doi: https://doi.org/10.1520/JAI12960
Fuel Analysis by Filter Furnace Electrothermal Atomic Absorption Spectrometry
J. ASTM Int.. July 2005, 2(7): 1–12.
doi: https://doi.org/10.1520/JAI12976
Durability Performance of Bridge Concretes, Part I: High Performance Concrete (HPC)
J. ASTM Int.. July 2005, 2(7): 1–14.
doi: https://doi.org/10.1520/JAI13066
DP-SCD and LTMGC for Determination of Low Sulfur Levels in Hydrocarbons
J. ASTM Int.. July 2005, 2(7): 1–15.
doi: https://doi.org/10.1520/JAI13090
Fatigue Testing of Bone Cements — Comparison of Testing Arrangements
J. ASTM Int.. July 2005, 2(7): 1–11.
doi: https://doi.org/10.1520/JAI13105
Durability Performance of Bridge Concretes, Part II: High-Strength Concrete (HSC)
J. ASTM Int.. July 2005, 2(7): 1–12.
doi: https://doi.org/10.1520/JAI14019
A Prospective Study of Injuries in NCAA Intercollegiate Ice-Hockey Goaltenders
J. ASTM Int. (March 2009)
Stabilization of Suspension Concentrate Formulations via Specialized Double-comb Polymers
J. ASTM Int. (June 2009)
Assessing and Classifying the Fire-Resistance of Industrial Hydraulic Fluids: The Way Ahead?
J. ASTM Int. (June 2009)
More Accurate Approximation of J-Integral Equation for Evaluating Fracture Resistance Curves
J. ASTM Int. (January 2010)
