... ET AL. ON FLEXURAL STRENGTH STATISTICAL ANALYSIS 3 FIG. 2 Flexural tensile strength versus void area for Type N masonry cement mortar. N masonry cement mortar 8 was 73 psi. Sarker and Brown 9 found that the bond wrench results for clay masonry walls are greater than ASTM E518 10 prism test...

..., pulse velocity change, and flexural parameters (ultimate deflection and flexural strength) of specimens subjected to freezing and thawing cycles were determined in the test. In addition, air-void parameters, in accordance with ASTM C457, modified point count method, and pore size distribution obtained...

.... 2007 . ASTM Standard C78-02, “ Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading ,” Annual Book of ASTM Standards , ASTM International , West Conshohocken, PA . ASTM Standard D4541-02, “ Standard Test Method for Pull-Off Strength of Coatings...

..., flexural strength (ASTM C 880) was introduced to address material variability. The evolution of ASTM C 880 included increasing specimen width to further incorporate variability of the stone. Recently, the authors have introduced full panel testing in the design and evaluation process. This paper...

... in 2002 requires travertine supplied under this speci cation to have the following physical properties: Absorption by weight, max. C 97 : Density, min. C 97 : Compressive strength, min. C 170 : Modulus of rupture, min. C 99 : Abrasion resistance, min. C 241/C 1353 : Flexural strength, min. C 880...

... of 300, 500, and 800°C. A decrease in Young's modulus was observed after irradiation, and its irradiation temperature dependence qualitatively agreed with the calculated modulus change due to point defect swelling. Irradiation caused a significant modification of statistical flexural strength but caused...

...C Chan; KC Hover; KJ Folliard An experimental program was conducted to examine the variations and distribution of measured properties in Segmental Retaining Wall (SRW) units. Flexural strength, flexural elastic modulus, and rate of absorption tests were conducted on specimens extracted from various...