Skip Nav Destination
Issues
February 1977
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
In this Issue
Research Papers
An Investigation of Factors Contributing to Wide Gage on Tangent Railroad Track
J. Eng. Ind. February 1977, 99(1): 1–9.
doi: https://doi.org/10.1115/1.3439138
Topics:
Gages
,
Railroads
,
Rails
,
Dynamic response
,
Dynamics (Mechanics)
,
Failure
,
Fatigue
,
Fatigue failure
,
Fatigue life
,
Pacific Ocean
Hunting Stability of Rail Vehicles with Torsionally Flexible Wheelsets
J. Eng. Ind. February 1977, 99(1): 10–17.
doi: https://doi.org/10.1115/1.3439122
Topics:
Rail vehicles
,
Stability
,
Wheelsets
,
Trucks
Analysis of Thermal Stresses and Residual Stress Changes in Railroad Wheels Caused by Severe Drag Braking
J. Eng. Ind. February 1977, 99(1): 18–23.
doi: https://doi.org/10.1115/1.3439136
Topics:
Braking
,
Drag (Fluid dynamics)
,
Rail wheels
,
Stress
,
Thermal stresses
,
Wheels
,
Yield point
,
Brakes
,
Compressive stress
,
Computer software
On Some Problems Associated With Vibration Isolation of Ship Machinery
J. Eng. Ind. February 1977, 99(1): 24–30.
doi: https://doi.org/10.1115/1.3439146
Topics:
Machinery
,
Ships
,
Vibration isolation
,
Vibration
,
Vibration isolators
,
Deformation
,
Displacement
,
Inertia (Mechanics)
,
Rotation
Application of a New Penalty Function Method to Design Optimization
J. Eng. Ind. February 1977, 99(1): 31–36.
doi: https://doi.org/10.1115/1.3439160
Topics:
Design
,
Nonlinear programming
,
Optimization
On Optimal Arch Design
J. Eng. Ind. February 1977, 99(1): 37–40.
doi: https://doi.org/10.1115/1.3439161
Topics:
Arches
,
Design
,
Buckling
,
Cross section (Physics)
,
Eigenvalues
,
Engineers
,
Failure
Dynamic Response of Elastic Rods Under Parametric Excitations
J. Eng. Ind. February 1977, 99(1): 41–45.
doi: https://doi.org/10.1115/1.3439162
Topics:
Dynamic response
,
Excitation
,
Rods
,
Differential equations
,
Linkages
,
Partial differential equations
,
Vibration
,
Waves
Comparative Analysis of Trash Contamination in Cotton by Optical Scanning
J. Eng. Ind. February 1977, 99(1): 46–50.
doi: https://doi.org/10.1115/1.3439163
Topics:
Contamination
,
Municipal solid wastes
,
Solid wastes
,
Imaging
Effects of Spindle Centering on Ring-Spinning Tension
J. Eng. Ind. February 1977, 99(1): 51–55.
doi: https://doi.org/10.1115/1.3439164
Topics:
Spin (Aerodynamics)
,
Spinning (Textile)
,
Tension
Particle Size Analysis of Cotton Dust Using Scanning Electron Microscopy
J. Eng. Ind. February 1977, 99(1): 56–60.
doi: https://doi.org/10.1115/1.3439165
A Unique Cotton Sliver Drafting System
J. Eng. Ind. February 1977, 99(1): 61–64.
doi: https://doi.org/10.1115/1.3439166
Power Input to Weaving Looms Driving Motors
J. Eng. Ind. February 1977, 99(1): 65–70.
doi: https://doi.org/10.1115/1.3439167
The Effects of Fiber Properties and Preparation on Trash Removal and Properties of Open-End Cotton Yarns
J. Eng. Ind. February 1977, 99(1): 71–76.
doi: https://doi.org/10.1115/1.3439168
Topics:
Cotton yarns
,
Fibers
,
Municipal solid wastes
,
Solid wastes
,
Rotors
,
Yarns
,
Rollers
,
Spin (Aerodynamics)
,
Pressure
,
Statistical analysis
Mechanical Couplings—A General Geometrical Theory, Part 1: Theorems on Algebraic Loci and Couplings
J. Eng. Ind. February 1977, 99(1): 77–81.
doi: https://doi.org/10.1115/1.3439169
Topics:
Algebra
,
Couplings
,
Theorems (Mathematics)
,
Degrees of freedom
,
Linkages
Mechanical Couplings—A General Geometrical Theory, Part 2: Examples and Applications of the Theorems
J. Eng. Ind. February 1977, 99(1): 82–87.
doi: https://doi.org/10.1115/1.3439170
Topics:
Couplings
,
Theorems (Mathematics)
,
Algebra
Design and Analysis of Multilink Flexible Mechanisms With Multiple Clearance Connections
J. Eng. Ind. February 1977, 99(1): 88–96.
doi: https://doi.org/10.1115/1.3439171
Topics:
Clearances (Engineering)
,
Design
,
Complex systems
,
Dynamic models
,
Elasticity
Application of Instantaneous Invariants to the Analysis and Synthesis of Mechanisms
J. Eng. Ind. February 1977, 99(1): 97–103.
doi: https://doi.org/10.1115/1.3439172
Topics:
Kinematics
Mechanisms as Components of Dynamic Systems: A Bond Graph Approach
J. Eng. Ind. February 1977, 99(1): 104–111.
doi: https://doi.org/10.1115/1.3439121
Topics:
Dynamic systems
,
Kinematics
,
Computation
,
Degrees of freedom
,
Displacement
,
Dynamics (Mechanics)
Cable Kinking Analysis and Prevention
J. Eng. Ind. February 1977, 99(1): 112–115.
doi: https://doi.org/10.1115/1.3439123
Optimum Synthesis of Multiloop Planar Mechanisms for the Generation of Paths and Rigid-Body Positions by the Linear Partition of Design Equations
J. Eng. Ind. February 1977, 99(1): 116–123.
doi: https://doi.org/10.1115/1.3439124
Topics:
Design
,
Dimensions
,
Errors
Synthesis of Function Generating Spatial Mechanisms With Optimum Structural Error
J. Eng. Ind. February 1977, 99(1): 124–130.
doi: https://doi.org/10.1115/1.3439125
Dynamic Simulation of Planar Mechanical Systems With Lubricated Bearing Clearances Using Vector-Network Methods
J. Eng. Ind. February 1977, 99(1): 131–137.
doi: https://doi.org/10.1115/1.3439126
Topics:
Bearings
,
Simulation
,
Clearances (Engineering)
,
Computer software
,
Dynamic response
,
Lubricants
Optimal Cantilever Dynamic Vibration Absorbers
J. Eng. Ind. February 1977, 99(1): 138–141.
doi: https://doi.org/10.1115/1.3439127
Topics:
Cantilevers
,
Vibration absorbers
,
Cantilever beams
,
Damping
,
Approximation
Sensitivity of Torsional Natural Frequencies
J. Eng. Ind. February 1977, 99(1): 142–143.
doi: https://doi.org/10.1115/1.3439128
Acoustodynamics of the Longitudinal Collinear Impact of Finite Elastic Cylinders
J. Eng. Ind. February 1977, 99(1): 144–150.
doi: https://doi.org/10.1115/1.3439129
Topics:
Cylinders
,
Noise (Sound)
,
Acoustics
,
Oscillations
,
Pressure
,
Radiation (Physics)
,
Separation (Technology)
,
Sound pressure
,
Vibration
Torsional Amplitude Growth With Resonant Forcing
J. Eng. Ind. February 1977, 99(1): 151–152.
doi: https://doi.org/10.1115/1.3439130
Topics:
Resonance
The Use of a Random Algorithm for Dynamic Optimization of Mechanisms
J. Eng. Ind. February 1977, 99(1): 153–156.
doi: https://doi.org/10.1115/1.3439131
Topics:
Algorithms
,
Optimization
,
Errors
,
Optimization algorithms
,
Stochastic processes
,
Vibration
,
Wheels
A Computer Simulation Model for Determining Fleet Size and Composition
J. Eng. Ind. February 1977, 99(1): 157–161.
doi: https://doi.org/10.1115/1.3439132
Topics:
Algorithms
,
Computer simulation
,
Computers
,
Simulation models
,
Vehicles
Effects of Truck Design on Hunting Stability of Railway Vehicles
J. Eng. Ind. February 1977, 99(1): 162–171.
doi: https://doi.org/10.1115/1.3439133
Topics:
Design
,
Railway vehicles
,
Stability
,
Trucks
,
Roller bearings
,
Plain bearings
,
Wheelsets
Influence of Nonlinear Wheel/Rail Contact Geometry on Stability of Rail Vehicles
J. Eng. Ind. February 1977, 99(1): 172–185.
doi: https://doi.org/10.1115/1.3439134
Topics:
Geometry
,
Rail vehicles
,
Rails
,
Stability
,
Wheels
,
Freight cars
,
Dry friction
,
Vehicles
,
Flanges
,
Nonlinear equations
Influence of Axle Load, Track Gage, and Wheel Profile on Rail-Vehicle Hunting
J. Eng. Ind. February 1977, 99(1): 186–195.
doi: https://doi.org/10.1115/1.3439135
Topics:
Gages
,
Rail vehicles
,
Stress
,
Wheels
,
Oscillations
,
Wheelsets
,
Friction
,
Limit cycles
,
Algorithms
,
Automobiles
Performance Characteristics of Freight-Car Trucks Determined Through Road Testing
J. Eng. Ind. February 1977, 99(1): 196–205.
doi: https://doi.org/10.1115/1.3439137
Topics:
Freight cars
,
Performance characterization
,
Roads
,
Testing
,
Trucks
,
Friction
,
Railroads
Numerical Solution of a Deep-Drawing Problem
J. Eng. Ind. February 1977, 99(1): 206–209.
doi: https://doi.org/10.1115/1.3439139
Topics:
Anisotropy
,
Friction
,
Membranes
,
Shells
,
Work hardening
Optimization of Cutting Conditions for Multi-Pass Operations Considering Probabilistic Nature in Machining Processes
J. Eng. Ind. February 1977, 99(1): 210–217.
doi: https://doi.org/10.1115/1.3439140
Topics:
Cutting
,
Machining
,
Optimization
,
Algorithms
,
Dynamic programming
,
Stochastic programming
,
Turning
,
Uncertainty
Stochastic Geometry of Anisotropic Random Surfaces With Application to Coated Abrasives
J. Eng. Ind. February 1977, 99(1): 218–224.
doi: https://doi.org/10.1115/1.3439141
Topics:
Abrasives
,
Anisotropy
,
Geometry
,
Density
Cut-Forming: A New Method of Producing Wire
J. Eng. Ind. February 1977, 99(1): 225–228.
doi: https://doi.org/10.1115/1.3439142
Topics:
Wire
,
Cutting
,
Cutting tools
Assessment of Deep-Drawability and Stretchability by Bulge Test of Concentrically Grooved Metal Disks
J. Eng. Ind. February 1977, 99(1): 229–236.
doi: https://doi.org/10.1115/1.3439143
On the Doubly Regenerative Stability of a Grinder: the Combined Effect of Wheel and Workpiece Speed
J. Eng. Ind. February 1977, 99(1): 237–241.
doi: https://doi.org/10.1115/1.3439144
The Frictional Mechanism on the Surface of Metal Being Plastically Deformed by Drawing
J. Eng. Ind. February 1977, 99(1): 242–249.
doi: https://doi.org/10.1115/1.3439145
Topics:
Metals
,
Welding
,
Boundary lubrication
,
Shear stress
,
Deformation
,
Friction
,
Pressure
,
Steel
Stiffness of Machine Tool Joints: A Random-Process Approach
J. Eng. Ind. February 1977, 99(1): 250–256.
doi: https://doi.org/10.1115/1.3439147
Topics:
Machine tools
,
Stiffness
,
Stochastic processes
,
Bolted joints
,
Deflection
,
Dimensions
,
Materials properties
,
Plasticity
,
Stress
,
Wavelength
On the Mechanics of Tapping by Cutting
J. Eng. Ind. February 1977, 99(1): 257–262.
doi: https://doi.org/10.1115/1.3439148
Topics:
Cutting
,
Torque
,
Deformation
,
Experimental analysis
High-Speed Films of the Incipient Cutting Process in Machining at Conventional Speeds
J. Eng. Ind. February 1977, 99(1): 263–268.
doi: https://doi.org/10.1115/1.3439149
Rigidity Analysis and Optimization of Warren Beams in Torsion
J. Eng. Ind. February 1977, 99(1): 269–273.
doi: https://doi.org/10.1115/1.3439150
Topics:
Optimization
,
Stiffness
,
Torsion
,
Weight (Mass)
Design of a Fiber Optic Pressure Transducer
J. Eng. Ind. February 1977, 99(1): 274–279.
doi: https://doi.org/10.1115/1.3439151
Fracture and Wear as Factors Affecting Stochastic Tool-Life Models and Machining Economics
J. Eng. Ind. February 1977, 99(1): 281–286.
doi: https://doi.org/10.1115/1.3439156
Topics:
Economics
,
Fracture (Materials)
,
Fracture (Process)
,
Machining
,
Wear
,
Cutting tools
,
Failure
,
Failure mechanisms
Discussions
Discussion: “Design of a Fiber Optic Pressure Transducer” (Pahler, Jr., R. H., and Roberts, Jr., A. S., 1977, ASME J. Eng. Ind., 99, pp. 274–279)
J. Eng. Ind. February 1977, 99(1): 279.
doi: https://doi.org/10.1115/1.3439153
Topics:
Design
,
Fibers
,
Pressure transducers
Discussion: “Design of a Fiber Optic Pressure Transducer” (Pahler, Jr., R. H., and Roberts, Jr., A. S., 1977, ASME J. Eng. Ind., 99, pp. 274–279)
J. Eng. Ind. February 1977, 99(1): 279–280.
doi: https://doi.org/10.1115/1.3439154
Topics:
Design
,
Fibers
,
Pressure transducers
Closure to “Discussions of ‘Design of a Fiber Optic Pressure Transducer’” (1977, ASME J. Eng. Ind., 99, pp. 279–280)
J. Eng. Ind. February 1977, 99(1): 280.
doi: https://doi.org/10.1115/1.3439155
Closure to “Discussions of ‘The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods’” (1976, ASME J. Eng. Ind., 98, pp. 1375–1376)
J. Eng. Ind. February 1977, 99(1): 287.
doi: https://doi.org/10.1115/1.3439157
Topics:
Extruding
,
Flow (Dynamics)
,
Hydrostatics
,
Pressure
Discussion: “Analysis of In-Process Buffers for Multi-Input Manufacturing Systems” (Law, S. S., Baxter, R. J., and Massara, G. M., 1975, ASME J. Eng. Ind., 97, pp. 1079–1086)
J. Eng. Ind. February 1977, 99(1): 287.
doi: https://doi.org/10.1115/1.3439158
Topics:
Manufacturing systems
,
Polishing equipment
Closure to “Discussion of ‘Analysis of In-Process Buffers for Multi-Input Manufacturing Systems’” (1977, ASME J. Eng. Ind., 99, p. 287)
J. Eng. Ind. February 1977, 99(1): 287.
doi: https://doi.org/10.1115/1.3439159
Topics:
Manufacturing
,
Polishing equipment
Email alerts
RSS Feeds
Special Section: Manufacturing Science Engineering Conference 2024
J. Manuf. Sci. Eng (November 2024)
Anisotropy in Chip Formation in Orthogonal Cutting of Rolled Ti-6Al-4V
J. Manuf. Sci. Eng (January 2025)
Thermoacoustic Consolidation of Metal Particles for Energy-Efficient Metal Powders Recycling in Metal Additive Manufacturing
J. Manuf. Sci. Eng (February 2025)
Modeling and Experimental Investigation of Surface Generation in Diamond Micro-Chiseling
J. Manuf. Sci. Eng (February 2025)
Estimation of Temperature Rise in Magnetorheological Fluid-Based Finishing of Thin Substrate: A Theoretical and Experimental Study
J. Manuf. Sci. Eng (February 2025)
