Arthritis, degenerative disc disease, spinal stenosis, and other ailments lead to the deterioration of the facet joints of the spine, causing pain and immobility in patients. Dynamic stabilization and arthroplasty of the facet joints have advantages over traditional fusion methods by eliminating pain while maintaining normal mobility and function. In the present work, a novel dynamic stabilization spine implant design was developed using computational analysis, and the final design was fabricated and mechanically tested. A model of a fused L4–L5 Functional Spinal Unit (FSU) was developed using Pro/Engineer (PTC Corporation, Needham, MA). The model was imported into commercial finite element analysis software Ansys (Ansys Inc., Canonsburg, PA), and meshed with the material properties of bone, intervertebral disc, and titanium alloy. Physiological loads (600N axial load, 10 N-m moment) were applied to the model construct following the protocol developed by others. The model was subjected to flexion/extension, axial rotation, and lateral bending, and was validated with the results reported by Kim et al. The validated FSU was used as a base to design and evaluate novel spine implant designs, using finite element anlysis. A comparison of the flexion-extension curve of six designs and an intact spine was carried out. Range of motion of the new designs showed up to 4 degrees in flexion and extension, compared to less than one degree flexion/extension in a fused spine. The design that reproduced normal range of motion best was optimized, fabricated and prepared for mechanical testing. The finalized dynamic stabilization design with spring insert was implanted into a L4-L5 FSU sawbone (Pacific Research Laboratories, Vashon, WA) using Stryker Xia pedicle screws. The construct was potted using PMMA, and was subjected to flexion/extension, axial rotation, and lateral bending loads using MTS mechanical testing machine. The stiffness of the design was assessed and compared with computational analysis results.
Skip Nav Destination
Article navigation
Design Of Medical Devices Conference Abstracts
Design of a Dynamic Stabilization Spine Implant
J. Bryndza,
J. Bryndza
The College of New Jersey
, Ewing, NJ
Search for other works by this author on:
M. Paliwal
M. Paliwal
The College of New Jersey
, Ewing, NJ
Search for other works by this author on:
J. Bryndza
The College of New Jersey
, Ewing, NJ
A. Weiser
The College of New Jersey
, Ewing, NJ
M. Paliwal
The College of New Jersey
, Ewing, NJJ. Med. Devices. Jun 2009, 3(2): 027532 (1 pages)
Published Online: July 9, 2009
Article history
Published:
July 9, 2009
Citation
Bryndza, J., Weiser, A., and Paliwal, M. (July 9, 2009). "Design of a Dynamic Stabilization Spine Implant." ASME. J. Med. Devices. June 2009; 3(2): 027532. https://doi.org/10.1115/1.3147482
Download citation file:
673
Views
Get Email Alerts
Cited By
Preliminary Assessment of a Laparoscopic Training System Using Magneto-Rheological Clutches and Virtual Reality
J. Med. Devices (September 2023)
Development and Mechanical Testing of Implant for Cranial Reconstruction After Burr Hole Trepanation
J. Med. Devices (September 2023)
A Novel Quasilinear Viscoelastic Model of the Bending of a Steerable Catheter
J. Med. Devices (September 2023)
Related Articles
Design of an Endoreactor for the Cultivation of a Joint-Like-Structure
J. Med. Devices (June,2009)
A Design Framework of Unloaded Leaflet Shape for the Ovine Pulmonary Valve Single Leaflet Replacement Surgery
J. Med. Devices (June,2011)
The Therapress 1600i: Accelerating Knee Rehabilitation
J. Med. Devices (June,2009)
A New External Fixator Design for Femoral Fracture Reduction
J. Med. Devices (June,2008)
Related Proceedings Papers
Related Chapters
Role of Artificial Intelligence in Hepatitis B Diagnosis
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Study of Mechanical Properties for the Medical Titanium Alloy Ti-6Al-4V ELI
International Conference on Control Engineering and Mechanical Design (CEMD 2017)
The Parker Case and Institutional Confidence
A Centennial History of the American Society of Mechanical Engineers: 1880-1980