The efficient operation of a solar cooling system strongly depends on the chiller behavior under part load conditions, since driving energy and cooling load are never constant. For this reason, the performance of a single stage, hot water driven 30 kW -absorption chiller employed in a solar cooling system with a field of evacuated tube collector has been analyzed under part load conditions with both simulations and experiments. A simulation model has been developed for the whole absorption chiller (Type Yazaki WFC-10), where all internal mass and energy balances are solved. The connection to the external heat reservoirs of hot, chilled, and cooling water is done by lumped and distributed UA values for the main heat exchangers. In addition to an analytical evaporator model—which is described in detail—experimental correlations for UA values have been used for the condenser, generator, and solution heat exchanger. For the absorber, a basic model based on the Nusselt theory has been employed. The evaporator model was developed, taking into account the distribution of refrigerant on the tube bundle, as well as the change in operation from a partially dry to an overflowing evaporator. A linear model is derived to calculate the wetted area. The influence of these effects on cooling capacity and coefficient of performance (COP) is calculated for three different combinations of hot and cooling water temperature. The comparison to experimental data shows a good agreement in the various operational modes of the evaporator. The model is able to predict the transition from partially dry to an overflowing evaporator quite well. The present deviations in the domain with high refrigerant overflow can be attributed to the simple absorber model and the linear wetted area model. Nevertheless, the results of this investigation can be used to improve control strategies for new and existing solar cooling systems.
Skip Nav Destination
e-mail: jan.albers@tu-berlin.de
Article navigation
February 2010
Research Papers
Simulation and Experimental Analysis of a Solar Driven Absorption Chiller With Partially Wetted Evaporator
Jan Albers,
e-mail: jan.albers@tu-berlin.de
Jan Albers
Technische Universität Berlin
, Marchstraße 18, D-10587 Berlin, Germany
Search for other works by this author on:
Giovanni Nurzia,
Giovanni Nurzia
Dipartimento di Ingegneria Industriale,
Università degli Studi di Bergamo
, Viale Marconi, 24044 Dalmine (BG), Italy
Search for other works by this author on:
Felix Ziegler
Felix Ziegler
Technische Universität Berlin
, Marchstraße 18, D-10587 Berlin, Germany
Search for other works by this author on:
Jan Albers
Technische Universität Berlin
, Marchstraße 18, D-10587 Berlin, Germanye-mail: jan.albers@tu-berlin.de
Giovanni Nurzia
Dipartimento di Ingegneria Industriale,
Università degli Studi di Bergamo
, Viale Marconi, 24044 Dalmine (BG), Italy
Felix Ziegler
Technische Universität Berlin
, Marchstraße 18, D-10587 Berlin, GermanyJ. Sol. Energy Eng. Feb 2010, 132(1): 011016 (8 pages)
Published Online: January 11, 2010
Article history
Received:
August 17, 2008
Revised:
July 27, 2009
Published:
January 11, 2010
Citation
Albers, J., Nurzia, G., and Ziegler, F. (January 11, 2010). "Simulation and Experimental Analysis of a Solar Driven Absorption Chiller With Partially Wetted Evaporator." ASME. J. Sol. Energy Eng. February 2010; 132(1): 011016. https://doi.org/10.1115/1.4000331
Download citation file:
Get Email Alerts
Cited By
Related Articles
Experimental Investigation of the Hydraulic and Thermal Performance of a Phase Change Material Slurry in the Heat Exchangers
J. Thermal Sci. Eng. Appl (March,2011)
Compact Diesel Engine Waste-Heat-Driven Ammonia–Water Absorption Heat Pump Modeling and Performance Maximization Strategies
J. Energy Resour. Technol (June,2022)
Capacity Control for Refrigeration and Air-Conditioning Systems: A Comparative Study
J. Energy Resour. Technol (March,2001)
Performance of a Residential-Sized GAX Absorption Chiller
J. Energy Resour. Technol (September,2001)
Related Chapters
Techniques to Reduce Exchanger or System Cost
Heat Exchanger Engineering Techniques
Engineering and Physical Modeling of Power Plant Cooling Systems
Thermal Power Plant Cooling: Context and Engineering
Threshold Functions
Closed-Cycle Gas Turbines: Operating Experience and Future Potential