Skip Nav Destination
Issues
April 2003
ISSN 0889-504X
EISSN 1528-8900
In this Issue
Technical Papers
Combustor Turbine Interface Studies—Part 1: Endwall Effectiveness Measurements
J. Turbomach. April 2003, 125(2): 193–202.
doi: https://doi.org/10.1115/1.1561811
Topics:
Combustion chambers
,
Flow (Dynamics)
,
Pressure
,
Turbines
,
Coolants
,
Film cooling
,
Cooling
Combustor Turbine Interface Studies—Part 2: Flow and Thermal Field Measurements
J. Turbomach. April 2003, 125(2): 203–209.
doi: https://doi.org/10.1115/1.1561812
Topics:
Flow (Dynamics)
,
Combustion chambers
,
Vortices
,
Pressure
Effects of Aeroderivative Combustor Turbulence on Endwall Heat Transfer Distributions Acquired in a Linear Vane Cascade
J. Turbomach. April 2003, 125(2): 210–220.
doi: https://doi.org/10.1115/1.1559897
Measurement and Prediction of the Influence of Catalytic and Dry Low Combustor Turbulence on Vane Surface Heat Transfer
J. Turbomach. April 2003, 125(2): 221–231.
doi: https://doi.org/10.1115/1.1559898
Topics:
Combustion chambers
,
Heat transfer
,
Turbulence
,
Pressure
,
Reynolds number
Heat Transfer in Turbulent Boundary Layers Subjected to Free-Stream Turbulence—Part I: Experimental Results
J. Turbomach. April 2003, 125(2): 232–241.
doi: https://doi.org/10.1115/1.1538622
Topics:
Boundary layer turbulence
,
Heat transfer
,
Turbulence
,
Boundary layers
,
Wire
,
Skin friction (Fluid dynamics)
,
Uncertainty
,
Enthalpy
Heat Transfer In Turbulent Boundary Layers Subjected to Free-Stream Turbulence—Part II: Analysis and Correlation
J. Turbomach. April 2003, 125(2): 242–251.
doi: https://doi.org/10.1115/1.1538623
Leading-Edge Film-Cooling Physics—Part III: Diffused Hole Effectiveness
J. Turbomach. April 2003, 125(2): 252–259.
doi: https://doi.org/10.1115/1.1559899
Topics:
Coolants
,
Diffusers
,
Film cooling
,
Heating
,
Physics
,
Simulation
,
Turbines
,
Flow (Dynamics)
,
Cooling
,
Navier-Stokes equations
Numerical Investigation of Heat Transfer in Turbine Cascades With Separated Flows
J. Turbomach. April 2003, 125(2): 260–266.
doi: https://doi.org/10.1115/1.1556014
Effect of Endwall Motion on Blade Tip Heat Transfer
J. Turbomach. April 2003, 125(2): 267–273.
doi: https://doi.org/10.1115/1.1554411
Topics:
Blades
,
Clearances (Engineering)
,
Flow (Dynamics)
,
Heat transfer
,
Mass transfer
,
Pressure
,
Suction
,
Cascades (Fluid dynamics)
,
Vortices
,
Chords (Trusses)
Heat Transfer Enhancement Using a Convex-Patterned Surface
J. Turbomach. April 2003, 125(2): 274–280.
doi: https://doi.org/10.1115/1.1556404
Unsteady and Calming Effects Investigation on a Very High-Lift LP Turbine Blade—Part I: Experimental Analysis
J. Turbomach. April 2003, 125(2): 281–290.
doi: https://doi.org/10.1115/1.1556013
Topics:
Blades
,
Boundary layers
,
Flow (Dynamics)
,
Heat flux
,
Heat transfer
,
Reynolds number
,
Separation (Technology)
,
Suction
,
Turbines
,
Turbulence
An Experimental and Computational Study of the Formation of a Streamwise Shed Vortex in a Turbine Stage
J. Turbomach. April 2003, 125(2): 291–297.
doi: https://doi.org/10.1115/1.1545766
Topics:
Nozzle guide vanes
,
Shear (Mechanics)
,
Turbines
,
Vortices
,
Yaw
,
Blades
,
Flow visualization
,
Flow (Dynamics)
,
Simulation
,
Stators
Turbine Blade Trailing Edge Flow Characteristics at High Subsonic Outlet Mach Number
J. Turbomach. April 2003, 125(2): 298–309.
doi: https://doi.org/10.1115/1.1539057
Topics:
Blades
,
Flow (Dynamics)
,
Mach number
,
Pressure
,
Suction
,
Boundary layers
,
Vortex shedding
,
Wakes
A Novel Two-Dimensional Viscous Inverse Design Method for Turbomachinery Blading
J. Turbomach. April 2003, 125(2): 310–316.
doi: https://doi.org/10.1115/1.1545765
Topics:
Blades
,
Design
,
Design methodology
,
Flow (Dynamics)
,
Outflow
,
Pressure
,
Nozzles
,
Turbomachinery
Improving the Aero-Thermal Characteristics of Turbomachinery Cascades
J. Turbomach. April 2003, 125(2): 317–327.
doi: https://doi.org/10.1115/1.1544510
Topics:
Blades
,
Cascades (Fluid dynamics)
,
Flow (Dynamics)
,
Optimization
,
Stress
,
Design
Stator-Rotor Interactions in a Transonic Compressor— Part 1: Effect of Blade-Row Spacing on Performance
Steven E. Gorrell, Mem. ASME,, Theodore H. Okiishi, Mem. ASME, Fellow ASME,, William W. Copenhaver, Mem. ASME, Fellow ASME,
J. Turbomach. April 2003, 125(2): 328–335.
doi: https://doi.org/10.1115/1.1540119
Topics:
Blades
,
Compressors
,
Flow (Dynamics)
,
Generators
,
Pressure
,
Rotors
,
Stators
,
Wakes
Stator-Rotor Interactions in a Transonic Compressor—Part 2: Description of a Loss-Producing Mechanism
Steven E. Gorrell, Mem. ASME, Theodore H. Okiishi, Fellow ASME, Mem. ASME, William W. Copenhaver, Fellow ASME, Mem. ASME
J. Turbomach. April 2003, 125(2): 336–345.
doi: https://doi.org/10.1115/1.1540120
Topics:
Blades
,
Flow (Dynamics)
,
Generators
,
Pressure
,
Rotors
,
Shock (Mechanics)
,
Simulation
,
Stators
,
Wakes
,
Waves
Aerodynamics of a Transonic Centrifugal Compressor Impeller
J. Turbomach. April 2003, 125(2): 346–351.
doi: https://doi.org/10.1115/1.1540117
Topics:
Aerodynamics
,
Blades
,
Compressors
,
Computational fluid dynamics
,
Flow (Dynamics)
,
Impellers
,
Leakage
,
Mach number
,
Shock waves
,
Vortices
Maximum Bladed Disk Forced Response From Distortion of a Structural Mode
J. Turbomach. April 2003, 125(2): 352–363.
doi: https://doi.org/10.1115/1.1540118
Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks
J. Turbomach. April 2003, 125(2): 364–371.
doi: https://doi.org/10.1115/1.1539868
On the Three-Dimensional Finite Element Analysis of Dovetail Attachments
J. Turbomach. April 2003, 125(2): 372–379.
doi: https://doi.org/10.1115/1.1539867
Topics:
Finite element analysis
,
Stress
,
Boundary-value problems
,
Blades
,
Disks
,
Interpolation
CFD Optimization of Cooling Air Offtake Passages Within Rotor Cavities
J. Turbomach. April 2003, 125(2): 380–386.
doi: https://doi.org/10.1115/1.1556405
Topics:
Cavities
,
Computational fluid dynamics
,
Cooling
,
Flow (Dynamics)
,
Optimization
,
Rotors
,
Simulation
,
Pressure
,
Design
,
Compressors
Influence of Rub-Grooves on Labyrinth Seal Leakage
J. Turbomach. April 2003, 125(2): 387–393.
doi: https://doi.org/10.1115/1.1539516
Topics:
Clearances (Engineering)
,
Discharge coefficient
,
Flow (Dynamics)
,
Geometry
,
Leakage
,
Visualization
,
Stators
,
Water
,
Engines
,
Gas turbines
Computation of Flow Between Two Disks Rotating at Different Speeds
J. Turbomach. April 2003, 125(2): 394–400.
doi: https://doi.org/10.1115/1.1539515
Topics:
Disks
,
Flow (Dynamics)
,
Computation
,
Boundary layers
Email alerts
RSS Feeds
Guideline for Large-Scale Analysis of Centrifugal Blower Using Wall-Resolved Large Eddy Simulation
J. Turbomach (February 2025)